eg hatch front confirmation

[-[NoS]-]

Guys,

i need some comfirmation on something.

im sick of my sedan front and have now decided to put the eg hatch front on it.

from what ive read i need to source out:
eg hatch front bumper
eg hatch bonnet
eg hatch front left fender
eg hatch front right fender

is this all i need ?

i got this quote from HONDWRECK for new parts

eg hatch front bumper - $100
eg hatch bonnet - $190
eg hatch front left fender - $90
eg hatch front right fender - $90

sounds resonable?

[WANKFACTR]

you will also need a radiator surport beam if you car is either a different model or if there was a face lift in the eg models and you have the other face, i had to do this with my civic as i went from the 98 to the 99 front end

[aimre]

yep, rad support needed. which means welding

[-[NoS]-]

damn!!! i thought it was straight bolt ons

[mrwillz]

welding shudnt cost to much

[-[NoS]-]

anyone recommend a place to do this????

[aimre]

plus u need all the lights too

[destrukshn]

it will not fit.
well it will all bolt on.
BUT.
there will be a 2 inch gap between your door and the gaurd.
btw people, this is a EG, not a EK

head lights are the same.
radiator support is the same.
hatch corner lights are different, hatch ones are shorter.
hatch gaurds are shorter.
hatch bonnet is shorter.
plus the gap where the hatch corner lights go into the gaurd are smaller.

i have attempted this myself, got a front end from a hatch, and it left about a 2inch gap between the gaurd and the door.

if you wanted to, custom make your gaurds practically.

[Boban]

15-POV just has the hatch bumper on his sedan, it's not perfect as it is shorter on the sides at the wheel arches, but if you are not too picky it looks reasonable

[-[NoS]-]

so wat ur saying is that if i did get

eg hatch front bumper
eg hatch bonnet
eg hatch front left fender
eg hatch front right fender
and hatch headlights

and bolt it on my seden

there would still be a gap between the front door and the front guards?

[aimre]

it will not fit.
well it will all bolt on.
BUT.
there will be a 2 inch gap between your door and the gaurd.
btw people, this is a EG, not a EK


radiator support is the same.

i have attempted this myself, got a front end from a hatch, and it left about a 2inch gap between the gaurd and the door.

if you wanted to, custom make your gaurds practically.

Isnt that why u get the new rad support?

[destrukshn]

Isnt that why u get the new rad support?

no.
radiator support between hatch and sedan is the SAME.