Check the VIN on the RTA database for any accident history as it may have been a write-off at some stage
Bring a magnet with you (ideally a soft fridge...
I disconnected my battery and reconnected it, after doing so the keyless entry won't work.
The red light on the steering column stays on constantly. I can see a small red button next to...
Yeah we all know the GT-R, EVO, RX7 etc can push out monster power, but there is so much potential the DC2 Type-R has to offer. Have you ever driven a boosted B18C7 on the street? Not many cars can...
How about the things we like about them?
I love DC2s, parts galore and they a freakin awesome to drive on boost with v-tec!
If only they all came as Type-Rs in standard form. They are the ultimate...
wtfalfred - Bit of a delayed response but in order to mix your Base Coat or Clear Coat you'll need to follow instructions on the label / suppliers directions. Base Coats for acrylic can vary, usually...
Like to prove it down the race track? B18C turbo will own any b18B turbo unless you are comparing a fully built b18B running ridiculous amounts of boost vs a stock b18c on boost. Stock vs stock, vtec...
For the price you can't go wrong with the Microtechs. Plenty of workshops would know how to tune them and getting the software and data cable is so easy.
First things first, you need to have your fueling and ecu set up for boost. Do not go cheap on injectors and ecu. Get yourself a set of 440cc's, fuel pump and a piggy back. T3's are a good turbo,...
Why don't you call AVO and get a quote. Do you even know what parts are included in the kit? You can take things out and that would lower the price so you can use parts of your choice (eg get rid of...
Why are you ruling out turbo chraged? I have no issues with my ITR box and it cops more power than any other rice boy N/A car would get. Daily driven and no problems what so ever. Been on the dyno...
If you guys can find me an Integra Vti-r 96+ model for under 14,000 in Melb with under 160000kms, let me know. I have been looking around for a few weeks now and can't find one.
Autobarn ones are crap. Going to modify my rail myself. Overwise JDM Concept sells rails for around $250 or so. Check em out on Ebay. (Vision seat rail)
It should be limited to certain rpms, power and minimal boost. The tuner shouldn't have it fully tuned until it has been worn in properly. The mechanic should use semi synthetic oil which doesn't...
To give you an idea, I am running around 9.8 with the inverted dome Arias pistons pushing 14 psi. I need stronger rods which is why I limit the motor to only 14 psi. I know a couple of people pushing...
You have to realise that some manufacturers use more of a high silicone content which makes the piston heat up quicker to reduce the "warm up noise", but in turn it actually makes the piston a bit...
The only problem you will have are the ring lands/rings if tuning isn't correctly done. Which idiot says you have to be in the high rev range to win races. You guys are all internet mechanics, bloody...