Search:

Hi guys,

I read somewhere that the ED/EF control arms are compatible with EG Civics.
Is this true?

Will my EF Civic hatch front lower control arm bolt on on my EG Civic without any issues?

Thanks mate. Are they all the same diameter as well..?

Hi guys,

Are the EG Civic hatch exhausts all the same?
ie. VTi, Si, GL, Breeze, GLi??

I want to put a standard exhaust back on my VTi but want to know what my options are as its harder to...

Hi Guys,

I've been searching for ever and cant find any info.

In particular I've been told and read that the Gen 2 CRX Fuel tank & fuel lines will bolt on perfectly on an ED Civic hatch. Will...

Mate, you dont need to get soo touchy about it. This is my first hand experience, and like you, I was left thinking WTF when this happened... It was suppose to be a simple 'bolt on' according to...

Im still doing the ED B16A conversion as we speak.. Should have finished ages ago but ive been really lazy and busy with work. Nearly finished though. Just gotta put on the panels, wheels, sussy and...

i just bought a sports organic clutch..
Just put it on but havent finished my conversion yet coz i've been really lazy..
Will let you know how it goes..
Its on a B16A EF9

Are Eibach springs THAT expensive?
I thought koni yellow's were only about $220 each.. $900. so that means $500 for a set of springs?
Koni's are great though if most of your driving will be on the...

i agree with Joneblaze..
the D16Y is a great start for a turbo conversion.. If power is what you want and u dont want to spend more than what your car is worth, going turbo is hard to beat..
its...

I know where to buy Falken Azenis silent sports (ST115) for under $100 each!!!
195/50/15.. I think Tempe sells them for $20 more...
They're not as good as the REAL sports in terms of grip, but...

Northy: You're right. The new MR-S only has the 1zz-fe. FE being the lesser DOHC with only variable timing and no lift.

Despite being a toyota fan, I would have to agree that the ITR DC2 is much...

If you cant decide get the best of both worlds..
get 2" middle piping into a 2.25" muffler section..

Mandrell is much better than press bent and u're only paying an extra 20% (or $50 for a cat...

Try Redline MT-90 or Redline Synthetic 75-90W (Which has an LSD additive).. Once you get that you will never put oem stuff ever again, even if they paid you..
Redline may cost $30 per litre but it's...

oh, by the way.. I may sound like a hypocrite advising u to go turbo, when I'm actually going the B16A route but our circumstances are different. U have a mean ass ZC engine, whereas i had the dodgy...

if instant power is your goal.. Turbos are hard to go past..
And damn it is addictive..

A turbo setup up may set u back about 20% more in price than a B16A, but the gains are phenomenal.

CRX...

Its beneficial in that the load from the engine crank to the gearbox is less, and thus, theoretically, u will accelerate faster and have more power at the wheel.. engine hp shouldnt change though..
...

if u want INSANELY smooth gear shifting... buy urself some redline MT90..
That stuff ROCKS!!!
espensive but well worth it

well done Honda. Toyota got 3 as well.
Check this.
http://www.bbc.co.uk/topgear/survey/last_10.shtml


No Jap cars there..
:)

and look
http://www.bbc.co.uk/topgear/survey/unreliable.shtml

man the honda range are just getting uglier and uglier...

They should try to copy Mazda.. Mazda styling rocks!!!

Ohh drag radials.. but still, a great 60 footer from a FWD.. Suspension must be tuned mighty good to get the power down off the line even with slicks.

http://www.speedworldmotorplex.com/calc.htm...

yeah b-r-e-n....

:P

yes targa's su*K...
I have one (MR2, not CRX) and it leaks slightly if the targa isnt put on perfectly.. very tempremental those rubber seals... Very annoying in the rain coz u get drops into ur...

Not true.
I know a place where they have 3x B18C ITR engines conversions..

in sydney

its still ok..
My ED is the new project now but i had a finger accident while using an air-compressor and portable jack... (Lost 1/2 a finger)

im nearly half way with the conversion but havent...

well done mate...
Yoda man...

Im still working on my conversion, but its a pathetic B16A compared to your wild H22A