Search:

Thanks mate, assuming it's the transmission mount to transmission bolts??

Hi All

Could someone please confirm the torque settings for the 16 gearbox/transmission bolts , I have researched and it varies form 20ftpound to 33footpound ??

Any help appreciated
Cheers

Hey All

I purchased the attached kit 3 years ago and installed it in a B16A cable box, has been fine with only very slight judder on occasions, the gearbox requires a rebuild that's the reason why...

yea not a bad idea, cheers will try an sniff test too? just need to find one!

yes that is true, always get what you pay for

Ok head gasket not confirmed, i am confused

drained the oil, looked perfect, no signs of coolant, refilled oil, started engine, looks like a light...

And has anyone had a leak down test done, if so where, they seem hard to find, once again, in melbourne, cheers

hey all, sorry to harass but can anyone recommend a good engine builder in melbourne for a b16a?

yes I think that is the way to go, remove the head and see whats what
budget might be the incorrect word, basically want to spend least amount $$$ possible but still have a quality job, happy to...

yep I agree, by the way is anyone on the same page as me regarding the above? I am assuming its worth purchasing a OEM head gasket, with the head off I guess valve stem seals are worth doing? I am on...

anyone have recommendations? also tried the honda car club vic but no response at this stage

traces of water in the rocker cover and a milky substance under the oil cap, going through coolant and it seems to be running a few degrees warmer than normal, from my understanding that sums up a...

ok looks like the head gasket is on its way out, i have reinstated a thread elsewhere regarding engine builders in melbourne, if the head is coming off may aswell have it inspected and look into...

or genisis racing in blackburn, just after my cylinder head to be inspected

bringing back an old thread, is Adrian at Razztech still the go to person for melbourne based engine builder?

out of interest why does (why would ) you want the 'blow off' / oil return back into the intake manifold and combine with the fuel/air- so it can burn away??

why cant this excessive oil return to...

I still have the black cannister still on the back of the block, with the hose running into a oil catch can (with air filter) for ventilation

yea oil was on the thread and tip of plug as in the electrode
going to grab a new cam cover gasket and o rings seals then a compression test is a good idea

Do you guys think the removal of the...

Hey Peeps

I have had starting issues suddenly appear, the b16a starts but runs very rough and only if i blip the throttle, it will not idle, it stalls as soon as I have no throttle.

I didn't...

Hi All

Has anyone hired corner weight scales in melbourne or know of anyone who supplies them?

Cheers

Could it be that the thrust bearing is incorrect? I thought there were only 2- one for cable and one for hydro? Can anyone confirm this ?

Anyone?

If do where would the spacer go ? Cheers

Ok that is true but I am not sure why it would be different to the original clutch setup I have. The tranny had a standard honda flywheel , pressure plate and clutch plate and the current pedal pivot...

Yea I thought it was more to do with slackness, the engine/box is in a mini so I dont have any adjustment on the pedal itself

Hi All

I have installed a brand new HD exedy clutch plate, pressure plate and lightened flywheel in my Y1 cable box, have driven car briefly, selects all gears, only downside is the clutch engages...