Search:

the colour will never match, it's to do with the finish on plastic & metal.

with plastic, they won't be able to touch it up, they'll need to respray the whole bar. you'll be looking between...

who's your insurer?
most of them offer lifetime guarantees on any work authorised by them

this case appears to be 'improper' installation.
i'd call up and make a complaint

you will need projectors to correctly aim the HIDs

check out powerbulbs.com/au
they do free shipping

i got my osram nightbreakers from there

doesn't matter if you declare your mods or not. it's still classified as a part of the vehicle.

if you have an agreed value, you don't get your parts back. it'd be your lost if you didn't increase...

yes, just swap the metal brackets over and you're done

as everyone else has stated, you've turned right across traffic so you'd be at fault.

in regards to your mods, they are classified as part of your vehicle so you won't be able to get them back....

http://gccorp.com.au/ for the NEO GB fluid

safest bet would be to take your old pads to the store so they can match it up

xlusive on cumberland hwy in smithfield are really good. 9756 6797, ask for david and tell him jimmy sent you

nulon 10w-30 + greddy oil filter
headlight restoration, before/after pics to come

as duckey said, regular service - engine oil, oil filter, air filter, petrol filter

you can buy an 'aerpro' harness from super cheap or autobarn.

500km from 45lt tank of 98ron, occasional VTEC here and there [=

EK4 is a 3 door hatch that came with a B16A
EJ is a 2 door coupe with a D16something
EM1 - 2 door coupe with B16A

you would be correct

thanks to everyone who posted, i'll try out a couple diff. theories and see if i can get her running again. please keep the ideas coming

will update once i have more info

power reading sounds about right, but as everyone else has said already, i'd re-check those torque figures

Hi, I've got an EK4 and I've no idea what's wrong with it.

I just put in a new radiator after putting off the job for 2 weeks.
So when I go to start her up and bleed the coolant, the battery was...

just a note, you can get a new bearing from CBC Australia.
recently got mine from there. 1 for $16, 2 for $19. go figure

check out http://www.youtube.com/watch?v=49kETjPZP9Y

V & E Rigoli tests different oils back to back on a mate's evo6

next to the Mobil, across the road from St Johns Park Bowling Club.

if you're using a GPS put in 93 Edensor Road, St Johns Park NSW 2176

if you're baller, you can try NEO from http://www.gccorp.com.au. NEO gold is $88 for 5 litres

EK9 & EK4 have the same front sway, 26mm

check if your LCAs have the holes for the end links, otherwise you'll need EK4/9 LCAs to fit them

you can use any flywheel you like. the flywheel weight will help to determine how quickly you can de/accelerate.

so by using something that is lighter than stock, you can accelerate more quickly

if you can stretch your budget a bit further, you can get an Exedy Sports Organic from either Toda or JDMYard

http://www.ozhonda.com/forum/showthread.php?t=103922...

get rear swaybar, best bang for buck handling mod you can do