B16a came out with different ratios over the years, safest option would be one out of the EK4 ie S4C box ie same ratios as Ek9 and DC2R series 1 pre 98 model.
shifting from the gearbox shift rod instead of with the shift linkage attached would only making the shift more difficult with less leverage, I guess you were trying to isolated the shift linkages...
Kinchrome do make a nice one, fren of mine bought an extensible one from a tool shop ( that stock a different Kinchrome line to Bunnings ). Not sure the exact tooth count but at least 60 teeth if...
Used both geniune b series Honda water pump by Yamada, as well as GMB ( jp made with jp bearings ) for different Hondas. Also used Trueflow for Mazdas ( with Jp bearings ). When I buy aftermarket...
Refraining from mentioning the G force sport as they are neither good at anything nor cheap; as well as the fact it's such an old tyre I expect them to be phased out by now.
When the EM1 as new the Dunlops it came with was only some very ordinary SP something something tyres; SP it's the family/series name like the potenza range in B/stone speak Or Eagle in Goodyear...
RE11 is a trackable street tyre with chunky tread blocks and heavily reinforced sidewalls at the expense of ride quality and noise. Other tyres in the same category include AD08, KU36, Dunlop D1 (...
Preceda's one of the best tyres made by Michelin considering it's meant to be a midrange performance tyre below the Pilot sport range. Very refined, quiet, predictable, plenty of grip wet and dry...
175kw atw we are expecting for my fren's build with byp, oe cast pistons and his existing k20a2 head. Torque will be lot more than before of course being 2.4L
so so true, not even that good to let it idle in modern efi cars let alone old carbied cars; often with choke let on to get the thing started in cooler weathers with raw fuel dumped into the...
Replaced the MC plenty of times in my eg racecar, I usually put in some brake fluid into the MC before tightening the hardlines ie fluid dripping out before tightening and thus minimise the air...
A good friend of mine in HK told me they used to weld on substantial pieces of steel at front and rear end of their race EG and EKs back in the day of Group N cups races at the Macau GPs in the early...
Best to run enclosed type bearings and not the taper roller bearings and their associated shims ( when he mentioned b18 bearings that's prob what he meant - enclosed type ) which makes the task of...