Search:

Ones for the outer joint, the others for the inner joint.

Buy CRX si-r knuckles then if you can find them.

If you can weld, or know somebody who can, there is not much to them.
Here is a great thread on honda-tech http://www.honda-tech.com/zerothread?id=957387

You can buy rod ends at...

Hey Phil,

How are your radius rod bushings?
Mine were screwed and used to result in a lot of wheel hop when launching.
Fulcrum have them for about $50. Or you could look into making up a new...

:thumbsup:

There are a few in this thread http://www.honda-tech.com/zerothread?id=247181

Just search the CRX/EF Civic forum on honda-tech for "rear sway bar" you will find heaps of threads.

Guys here is the best definition of understeer and oversteer I have found, it came from http://www.geocities.com/gkurka2001/CarTech/tech_index.htm
There is a lot of great reading on this site.

...

Are they welded quench pads?

The following is a quote from Omniman from a post on Honda-tech.

stock b16a with ctr pistons
cyl vol. 398.6cc
head Gasket 2.8cc
piston dome vol. 6.3cc big vol= 436.8
camber vol. 44cc small...

Contacts:

Shane Wilson Competition Engine Developments 0409 550 351/+61 8 8724 8000

Bill Hanson Engine Developments +61 8 8362 8545

Quantum Racing Industries +61 7 3290 5911


I would...

What tyres were these times run on?

Full slicks?

http://www.honda-tech.com/zerothread?id=919080

Here are some links:

For Wiseco pistons, Eagle Rods and Cometic gaskets:
www.theoldone.com
http://theoldone.com/components/pistons/

For Eagle rods, cometic gaskets, valve springs, valves and...

Here's a link

http://members.ozemail.com.au/~earls/

D16a6 = American crx.

Single cam non vtec.

WTF!!!

The wait is finally over.

http://www.honda-tech.com/zerothread?id=1154679

http://www.hasport.com

http://www.suspension.com

If your G/F does not mind a little vibration from the shifter at high rpm i recommend the B&M shift stabilizer kit.
It replaces the rubber bushings with aluminum mounts and the front mount is...

Buy a welder and make your own.

Welding/fabrication section of honda-tech rocks.

Like this?

http://dumpsterdive.org/scott/90.jpg

The PWR kit comes with a radiator thermofan etc.

http://www.pwr.com.au/pwr/index_new.html

Yes toe is adjustable on the rear as well.

Nice work Evan!!

b.t.w. are you "the original Evan" off the pgmfi forums?

Will the finished product be end user tunable, or will the software only be available to dealers?

Will it have...

Buy Australian................ Period.