Search:

What sleeves are you using?

I would first check/clean the idle air control valve first if your using the stock intake manifold and also check for vacuum leaks. The idle air control valve sits on the intake manifold towards the...

I agree with stndrd. Your probably best to buy a new one or a used working one then go through all the hassle of fixing one. But if you really want more advice you can contact Borla (formerly TWM...

Doing a B-series swap

http://farm9.staticflickr.com/8113/8626483625_df1abf9e90_c.jpg

I measured the hole distance from my headers
Hope the picture helps VVV

O 9cm O 8cm O 9cm O
O 8.5cm O 8cm O 8cm O 8.5cm O

Key:
O = holes
*cm = space in between...

I purchased Mugen headers a couple years ago and had the same problem. I returned it back to the seller.. I did eventually buy one. If the holes/studs don't line up the headers are not for your...

Your vin number should be on your rego sticker. If you don't have a red key you will need to be buy a new immobiliser from Honda which comes with a red key for programming and blank keys

Do you have a red key? You may be able get a key code from Honda to duplicate your key at the locksmith if they still have your car details on their system. PM me your vin no. and I can check for you

Thanks guys. Lots of good info :D

I might add this link as well cos I thought it was a interesting read

http://www.importtuner.com/tech/0703_impp_engine_heads_and_valves/viewall.html

I have one in my ek and the only reason I bought it is for ignition cut which I think is useful when you hit the limiter instead of fuel cut. Depends on what you want to use it for?? Like what...

I thought port matching the intake/exhaust manifolds with the head is the way to go. But you have suggested having one smaller than the other for anti-reversion which also makes sense.. I'm a bit...

Hey Ozhonda peepz.
I've tried to search forums for question on valve jobs and port and polish information but haven't really found anything that is really useful.
I'm upgrading my b18cr valvetrain...

Nice write up.. Now I'm waiting for a write up for a rear diffuser :p

I work at Honda and can tell you current recalls/technical service bulletins only apply to newer cars. When the car was recalled back in its younger days the owner would of received a letter. I have...

Yeh awesome man.. almost feels like I have 4pots at the front.. lol
Unfortunately not a huge difference but I guess anything counts:confused:

I swapped over from a EK4 brake assy to ITR 96spec brake assy. The front ITR brake pistons were slightly larger than the EK4. I'm not sure about the rear's though cos I never compared them.
...