Hi guys I currently have a dc2 vtir and have blown the gearbox, I have tried to do a search through the forum with no success. Im just wondering what choices on gearboxes do I have to replace my...
Best to contact mongoose about what alarms/addons they support with your model, but in most cases the remote start is built in the alarm system. There are plenty of alarms now with remote start at...
It wont be the a leak from the timing belt it self but from the front main seal. Best to change timing belt when fixing this seal. Oil on the timing belt will slowly soften and weaken the belt it...
Brown wires are wired directly to your indicators (on the back of your hazard switch will do), just find the left and right side with a test light. Im pretty sure it should be running off a + but...
What you can do is get the plates "customised" which is cheaper then personalised. In your case you can put them on any car that is registered under your name only, so you can't sell the plates off....
Even if you get the keys to fit into ignition barrel you will still need to change door locks, then after disable or reprogram your ECU or rechip your key to suit the immobiliser.
If you have no experience with wiring or alarms, i suggest you take it to a specialist to check it out as you might do more damage. But do check the fuse to the alarm, it sounds like it could have...
If you want any help wit fitting 0 offset, give me a PM and i can give you a few answers, my old eg = 15x8 -0offset, but stated above stretched tires is a start. Heres a few pictures on how mine...
On the steering column side before you put the boss kit on, there is a little spring loaded grounding point, you might need to bend that check if its grounding out the boss kit.
They will not fit if you want them any where near the guards. 0 offset with a 8" wide rim will stick roughly 2" out of the guard, a -12 and 8.5" rim is gonna be near impossible unless you go a full...
