Search:

Nice Mark.

Keen to see what your thoughts are on it once its all fitted up.

I think the EF9 bonnet is longer as the front is extended longer to allow more clearance between the headers and radiator. Thats you will need matching guards, bumper and so on.

I did a B16a...

Could you shoot me a pm on pricing for a set please?

Id like it so the guards are just on top of the tyres.
will have 15" wheels on it.

Skies the limit but am itll only be for road use plus remember its an ed so no point getting coilovers which are going to cost half of the car. lol...

Hi all.

Trying to decide what coilovers to go for on my ED Civic.

Just wanting to know what is out there and available and if anyone has had experince with certain onbrands.

Car is just for...

Hi all,

Just wondering if anyone would have information regarding bolt tensions/torque settings for the bottom end of a B16a.

Need tension settings for end flow crank shaft, mains, conrods &...

Awesome write up Peter:thumbsup:

I was actually working on the Scirocco and black C63 the day before!

The exhaust on the Scirocco sounded awesome and the one on the C63 was one of the most...

Best to use a steamer or even a hair dryer to get off as much as you can.

Be patient as flakey tint is a bit of a bitch and always wants to break off. Just make sure you heat it up enough to...

I compared my ED6 shocks/springs to the DA9's and the DA is definitely taller.

Here is a pic of my ED6's bay which is also an auto.

The black hole is where the clutch cable should go through (I think) and the blue is where the speedo cable goes.

This was pluged up with a...

One should be the speedo cable and the other should be the clutch cable.

I will be doing this on my ED6 conversion soon.

Just need the full pedal set and clutch cable and of course a manual gear box.

There is a definitely a hole in the firewall for the cable to run...

Im dreading the wiring as well.
I will most likely use the full wiring loom from the DA and change whatever plugs needed.

How much was the set Val? Need to grab a set myself.

Doing the rear brake conversion on my ED hopefully sometime this week ^_^

Its going to get a full respray. Going to try do it myself with the help of my mate (spray painter by trade) so I can get a better understanding of how paint works.

Sweet! Another ED build.

It looks like it becoming contagious.

Looking forward to how this progresses Val. ^_^

Your looking at $55 per hour.

And if its just small then it usually wont take more than that.

Cheers mate.

Is there any chance you can bring it around one day and ill be able to let you know whether it can be polished out.

Or post up some pics.

I might be able to organize to get the...

kool. thats what i was thinking.

Cheers

When doing a H22a conversion, can the standard manual gearbox still be used or will I have to source out a engine gearbox combo?

What type of mods can be done to the CD 2.2 vtecs without having to go to a H22a conversion?

Not looking for massive hp, just want to do some mods to give it more up and go on the street.

By...

Hey all,

Im considering getting an Accord anywhere from "96 to 99".

What I wanted to know is whats the difference between the vti-s and vti-l?

I have also noticed that the "96" is a 2.2 and...