Search:

After some research I believe the engine mount long bolts are 12x100

But not sure of the middle bolt on the trans or the thread type for the nuts

Can anyone tell me the lengths and thread type of these bolts

https://uploads.tapatalk-cdn.com/20170824/b40266bede1fc58b97e59a171cf77a45.jpg
...

Thanks for the tip..

I was going to use the Honda loom for the engine, ECU and dash, and feed the Honda side with power from the accessories feed from the mini loom.. but that’s just theory at...

Is there a gasket between the gearbox and the engine when mating them together ?

That’s exactly my point, I want to retain it because I want to install it but I’m not sure of the wiring diagram as to what relays it needs etc

I’m looking to remove the excess wiring off the Honda loom I have but don’t want to remove anything necessary,

Does anyone have a del sol (b16a2) AC wiring diagram ?

I took it to Neat in the end $345 quoted for the work needed

I might require about the costs.. I’m pretty tech savvy but it’s having the experience that makes a gearbox last

So I have a new mfactory final drive and LSD (comes with new bearing too) to install into my gearbox as well as a new Honda LS 5th,

Can anyone give me some tips on this when I have it all out ...

Can anyone recommend a site for oem gaskets

Does anyone have a labeled photo of a b16a2 interior loom ?

This post isn't needed anymore. Thankyou

I have recently acquired an EK and a Del sol speedo cluster, do they use the same two plugs? Ie. are they replaceable (dash fitting aside) ?
...

How about aftermarket like mfactory thermal intake gaskets ?

i have recently bought a B16A2 engine and i while its out im looking to replace some gaskets on the engine,

which gaskets are best to replace while its out and which brands are best or is OEM best...

I have a 27 tooth midshaft (so presumeably 27 tooth axles) but want to fit 32tooth axles, what do I need to fit these ? Just inner cvs?
If so which cars have the 32 tooth cvs I need ?

Thanks
...

I have a 27 tooth midshaft, but want to fit 32tooth axles, what do I need to fit these ?

Hi Bennjamin, do you have any pics of your loom before you installed it ?

I've seen it, thanks. Was a good video but they did things differently

Thanks for your help all, should still be able to make it fit into my mini

So the B18 is larger by 10cm?

Is a b18c2 physically any larger than a b16a ??

So this is the civic EK5 engine harness we are talking about ? I would imagine the only thing the dash cluster would need would be the petrol sender feed for the gauge, ignition + 12v for the engine,...

I'm about to do an engine conversion with a Honda b16 or B18 into a mini, as part of this I'm looking to use a SiR EG6 speedo,

I want to now what feed into this and from where

I'd like to keep...

I'm about to do an engine conversion with a Honda b16 or B18 into a mini, as part of this I'm looking to use a SiR EG6 speedo,

I want to now what feed into this and from where

I'd like to keep...