Search:

Where are you located? There was on at the wreckers near me last time I was there.

Not trying to put you off. But there is no way you will have a good turbo set up for $700. You won't even get a shit turbo set up for that amount.

I turbo my civic while at uni and it is done with...

A lot better than using silicone. You can get closed cell foam similar to what the original gaskets are made of and make mew ones. Much better idea. I wouldn't suggest anyone use silicone to seal...

Any updates??

Looking at the photo of the engine, its either not originally carby or they swaped the engine out for a FI one and put all the carby intake back on. Reason being it has a CAS on the exhaust cam, the...

It's a waste of time, you will never get the temps below ambient unless you use ice or dry ice to cool the water down.

Yeah, Trism is right, you dont need a PCV valve in you set up and the stock one will be causing a major restriction and there is no vacuum to open it.

On my set up i have removed the PCV and put...

http://www.ozhonda.com/forum/showthread.php?100215-The-Turbod-AH-Hatch!

That is my build, its a 3G civic but the engine bay is exactly the same as a 1G CRX so its similar.

I was running...

This is a bit off topic but what is the bolt thing called? And where would you be able to get just that without the sandwhich plate?

I have a sweet thermostat sandwhich plate and need a new...

What about th Link G4 KnockLink? It is a stand alone light which tells you when the engine is detonating and when to back off abit. Or do you want one which will automatically retard the timing?
...

My guess is dobinsons springs. Look the exact same colour as my old springs

http://www.dobinsonsprings.com/site/index.html

Luke

Heres a link to my build

http://www.ozhonda.com/forum/showthread.php?100215-The-Turbod-AH-Hatch!

Its really fun to drive on the street and probably about as far as you would want to push a...

Ide do it this way

http://www.redpepperracing.com/forums/index.php?showtopic=20659&st=1080&p=368153&#entry368153

How did you mount it in the 1st gen?
If you used the stock mounts and modified the body you should be able to fit in a D16a3 easily

When the oil comes out of the turbo through the drain it is all "frothed" up, like the top of a milk shake kind of. This is why the drain tube must be much larger than the oil feed. When oil is in...

I didn't even read the female part to start off with, but yeah, I really doubt you would be able to get them. You would be best off just removing whatever end you have now and getting a complete hose...

http://pfefittings.com/index.php?cPath=661_706

or
http://www.speedflow.com.au/banjo.html

that should be what your after :)

One of the Traders sells the PFE fittings I believe.

Luke

I just bought some S2000 callipers from America to go on. they bolt straight up and use 11" or 280mm disks. I cant wait, it should stop good then!

I have a week off between uni and starting my new...

I got them from here http://www.heeltoeauto.com/Torsion-Bar-Hondas-c-53.html. Hopefully ill be buying some camber plates from there soon too with the dollar the way it is.

ramhorn?

http://www.ozhonda.com/forum/showthread.php?139854-**pics-up**-B-Series-Turbo-Setup!-T28-Ball-Bearing-Genuine-Bride-Zeta-II&highlight=turbo

This one? It looks pretty good quality to me and would...

Have a read through this site too. There's lots of good information there. The more you know about turbo's the easier it will be to do it.
The only bit to ignore would be the bit on the AFC Hack and...

Here's a list with some ideas with where to get some parts, there's probably some more bits you'll need. I've only turbo'd a d-series so not sure if you'll need any special parts for them but it's...

heres two thoughts ive just had while thinking about this.

1) I had to clock the turbo and use a different bracket to hold the actuator, could the actuator not be pussing far enough to open the...

Yep internal gate. Im planning on having my computer run a Haltec electronic solenoid so i guess ill get that all set up then take her in to be tuned.

Heres some old pics of the set up as i was...