Search:

I've been a member of this site for quite a while, I'm not a post whore but chime in when I've got something to say and in my opinion I usually have something to offer. I only really visit the s2000...

I haven't tried it... I use oem fluid as it gets quite a good write up in most instances on the s2ki web site from people in the know

If the revs climb but there is no 'push' in my (unqualified) opinion it is a drive train issue. My vote is clutch.

I suspect you clutch leak and clonking gearbox are one and the same problem. Get a new slave and/or master cylinder.

Hi Tay, if you've had your system bled 3 x already and your brakes are still poor I'm thinking it may be something else causing issue. I note this simple test is listed to test your brake booster, it...

This is Billman250's instructions for bleeding. In my opinion one of the best mechanics posting on s2ki with a huge array of posts.
The post uses a gravity bleed only without pumping the brake...

$815 delivered for a full set of DGR coilovers to your door including customized spring rates of your choice. I've had a set for a couple of months and happy as. Of course the sky's the limit though,...

Has your car been in a front end accident?

might be leftfield comment but are your tyre pressures ok?

... some info from Ling's

PFKL616727 DISK, FR. BRAKE

Well I did provide a means to answer your query (2 methods actually) and even then your query is ambiguous because you don't specify whether you're after a front or rear part number

Why would you buy oem discs? They're $$$. Can get a whole set of 4 discs a lot cheaper than one oem disc.
... Call your local dealer and ask or go to a foreign online Honda dealer such as Lings in...

... what time of the year do dust it off and fit it for the colder weather? Thinking of putting it on soon

sounds cheap and nasty to me

brake fluid = clutch fluid

Won't be transmission fluid!

The top of the clutch pedal attaches to a metal rod (which is part of the master clutch cylinder), the rod is threaded and turning it will lengthen or shorten it. it should be turned such that when...

Make sure to adjust the freeplay out of lever between pedal and master cylinder when you replace

I cringe looking at them on new Commodores

It could be either leaking.... figured I'd replace both of mine with peace of mind unlikely to give any troubles for a long time

Google swift spec r s2000 and you'll see quite a few s2k threads to read

By most accounts on s2ki if you're looking at springs swift spec r are the better buy.

Don't know for sure but suspect box might just be older packaging. If you were going to the trouble of...

+1 sell and buy

Slave cylinder is at the other end of the line, it's in the vicinity behind passenger front wheel near bellhousing. If you're checking yourself make sure vehicle is supported properly - don't want to...

Yes you're correct fluid will naturally reduce the reservoir level with clutch wear but this will be minimal over time. Given your large drop in fluid and difficulty engaging gears I suspect this is...