Access Denied
You don't have permission to access "http://www.ozhonda.com/forum/newreply.php?" on this server.
Reference #18.6db7d117.1411279591.3823930
i also have had great experience/service there. went in to fix a f*** up i did to the exhaust bolts, they fixed it for me very cheap and advised me to replace my dizzy.
i asked them if they could...
i think the hardest part about installation would be setting up your vacuum system. but if you follow the vacuum diagram from the standard system it shouldnt be too difficult to mock up something...
well you are up sizing your caliper/rotors as well as increasing pressure with the upgraded booster and master cylinder.
i think it would be wise as the standard eg one may not be up to the task....
it would be best to because your increasing the area of braking performance and pressure. you should also upgrade your booster and master cylinder while your there.
im not sure on what the numbers...
type r prop valves wont fit into the eg. you either need need to get them from EG6, del sol, EK4??, dc2 vtir.
the only type r prop valve that will fit is the '96 spec dc2r. go to the wreckers for it...
the symptoms sound very similar to a wheel that is out of balance.
check on the inner side of your wheel to see if you are missing any weights if they are aftermarket wheels.
you should be able to...
have you connected the battery back up?
have you removed the horn at anytime?
check to make sure you have voltage at one of the 2 wires, check from one cable to a good ground (this should have 12V)...
im not quite sure you understood what i meant.
-remove the allen keys bolts off from the horn button surrounding
-remove the cover the allen keys bolts were holding in place
-carefully remove the...
there is a golden/copper button that sits behind the red "H", did you install that correctly?
it has an indentation/nipple to, the highest point much be facing the engine bay.
i have removed the negative terminal from the battery post, thats all you need. just make sure the terminal doesn't touch anything while you are working, just manouvre it out of the way facing up.
...
where is your siren located? well when you find it it should have a key hole so you can "silent" it when/if your doing maintenance to the system.
were you provided with a key with your alarm system?...