I have installed the VTIS kit on my Jazz b4.
If you look under the side skirt there are 3 mounting blocks and 6 screws to
mount the skirt. On the inside of the skirt there are approx. 10 plastic...
Yeah. I agreed with you, its more of a personal taste.
I have seen it on BBF car, the mugen grille actually makes the front of the car more rounded and continous finishing from bonnet to bumper .
...
Totally agreed with your idea. A bit of gain with less $$ spend. The stock filter will work the same.
For % gain from mod, read this:
http://www.pumaracing.co.uk/gentune.htm
I suggest you should go back to the tyre shop where you have the wheels fitted. They should be able to help. Maybe with a rear wheel alignment with a 2 degreee camber or something like that.
It's only the part where there is a bolt to hold the rear bumper... Has anyone taken out the bolt and 'sand it' away to smooth out so it won't scrape tyres???
Get ground cable from ebay au. Full kit with installation manual cost $25 for 7mm thick cables or $40 for 9mm thick cables. Save on shipping if we buy togather.
Which Honda dealer did you get the qoute from.
Northside Honda in Brisbane qouted me $1600 for the vtis side skirts, front and rear under spoiler.
Southside Honda wanted $560 for the Modulo side...
You need to cut a short peice of water hose (50cm) to attach (tape) it to the vacuum hose so that you can insert the smaller hose into the hole you drilled to suck out all the plastic bits inside...
If you like big wheels. You should try Donnellans in Melb. Buddy Club P1 Racing SF 17x7 with Falken tyres.$1900 + $80 shipping. This wheel weight 17.5 lbs.
For your info P1 Racing SF is made in...