Search:

Did you install the clutch correctly ?
Is the slave rod pushing against the clutch fork when you press the clutch ?
Is your clutch fork straight (some forks don't like heavy duty clutches) ?
Is...

5char

Best bet would be to call around machine shops that work on Honda heads.

No one knows what your goals are or what modifications you have done to it.

Will fit fine. You can even put 175's on it if you want.

I don't think you'd notice a difference though unless it's a full blown out track car or the surface of the track is 100% flat with no...

I had this problem in the past and ended up putting the oil drain lower on the sump (sump was baffled though which helped with the flow as not to pool the line).

Any suggestions as to where to get my old bushings pushed out and new bushings pressed in that won't charge an arm and a leg ?

All parts are off the car already.

Pedders wanted $600 which is...

Just don't get duped into someone recommending a quick headgasket swap. Chances are you'll need it machined like ben said. If you DO need it machined and you just change the gaskets over, you'll get...

you know what's more annoying ? Not being able to access the website for a year unless going through 3G or a proxy.

I'm sure it will be fixed soon. Be thankful that you can even log on to the site.

Hey CAUSHN

This thread is almost 1 decade old.

thank
ohsc

ey mun, I cleared it then rubbed it back before polishing it

inb4 getfkdm8

I couldn't retrieve my old DIY thread from when I deleted it when TheSaint was on his JDM D15B high horse moderating adventure.

I ended up using Menzerna FG500 and finished it off with Menzerna SF4000, result:

I went from this:

http://farm3.staticflickr.com/2810/12025034435_1ef9854a94_b.jpg

To this:
...

PRIMER

BEFORE APPLYING ANY SORT OF PRIMER/PAINT/CLEAR ETC, REMEMBER TO GIVE IT A WIPE DOWN WITH WAX & GREASE REMOVER AND MAKE SURE IT'S COMPLETELY DRY!

First thing is first, you want to setup...

Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor ozhomo take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own...

You must spread some Reputation around before giving it to EKVTIR-T again.

Yep, it seems it's finally fixed after a year lol. Thanks to whoever fixed it.

It's an issue with ozhonda that's been going on for almost a year now lel.

Atleast proxies work

^^^^^^^^^^^^^ ?^^^^^^^^^^^^^ ?^^^^^^^^^^^^^ ?^^^^^^^^^^^^^ ?

^^^^^^^^^^^^^ ?

Any updates ??

Can't ping 122.252.12.111, says request timed out.

Changed DNS settings to use google aswell as openDNS, still didn't work.

Tried using my normal DNS aswell, didn't work.

Reset my router,...

Thanks for looking into that dorikin. My router settings have never been touched nor has its firmware been updated for a while so it was obvious the issue was on ozhondas side of things.

Have tried that in cmd a few month ago. Always Times out.

I've been with tpg for about 6 years

Have had this issue for a few months. Currently logged on on my phone. If I use my Wi-Fi it won't load but when im on 3g it works fine.

When I try to go onto ozhonda from my computer it trys to...

What's the point of having a cage on the street ?

Save your money and buy good tyres with it instead..

I've seen so many cars with cages that have never seen the track, I never understand it.