Search:

Dr. Phil of Ozhonda?

wet sand it using really fine sand paper. then polish using autosol, then use plastic wax.

I shouldnt be really worrying about speeding fines, thats one advantage. Does anybody know where to get this calibrated? Does auto elec's do it?

I just purchased a honda jazz vti 02 (auto) and realised as I was driving that the speedometer reading is wrong reading 8-10 kms above what it should be. I found out that it is inaccurate coz i...

d2 coilovers ain't crap! I have it in my EK and its perfect no problem with it yet and value is good too.

yeah man if they're deep gutter marks, i'd leave it alone, or you can go to wheel repairer which will cost you.

are they actually gutter marks? because if they are, they'd have to be deep at some parts and would be hard to sand, i wouldnt think about sanding it if they are.

I dont have the "before" pics as i didnt really have intentions of posting it on DIY's sorry. post a colse up pic of ur rims and i'll tell you roughly if its close to what I've had.

same problem I had when i got my coils installed in my ek sedan. Rolling on 215/35/18, rear wheels tucking in about 1/2inch and hearing this clunk noise every bump and hard corners. So I checked it...

depends on how deep it is.. you can sand it... a lot of sanding!
I had the same problem when I bought my used rims; they looked bad then, but wiht a bit of hard labour to it,now its looks as new.

i dont have that problem on my d2's. install it and see for urself.

no way man! ive got 18x7.5 offset is +45 and have had problems.

Is my ek suspension (sedan) compatible with hatch backs?

raise the car and change ur shocks if possible mine is fixed now.

it'll be better to if u could wet sand it with 2000 grit then apply autosol. it works perfect. I will post before and after of my headlight

its cool. I already have a set. I got 11front, 5 rears

did he do a suspension check?

removing the plastic guard doesnt fix ur problem so dont bother coz its happened to me. the only option I have is change my suspension setup and raise my front end. Im currently rolling on 18x7.5....

just street use.
So what spring rate do have czy_sol87?

What is the recomended spring rate for d2 coilover?
Does anyone know what spring should i use to go on my ek. I want a stiff setup but no too stiff.

where did u get em?

my ek is currently dumped on stock shocks and reset springs and its pretty low but both wearing out now. Im thinking koni and kings. But where would I get koni's?

if possible with labour

whats the best sussy setup i can get for my budget? ($1100)?
car=ek1

http://img258.imageshack.us/img258/716/09072007150gp3.jpg
:thumbsup::thumbsup::thumbsup: