Search:

Hi,

Secondary o2 sensor and header from base model.

Would it fit on a Type R. Any downfalls, Thanks.

Hi,

I'm just wondering if there is a difference between the JDM Ep3R and JDM DC5R stock headers. Would they be the same 4-2-1 and same size?

I've searched quite a few sites and could not find...

Hey guys. Engine was de-greased and has been run for roughly 30mins with and without revs to see where the leak is from.

1. There is an oil leak coming from just next to the half-shaft where it...

Nope. With the oil filter it is a different story. You want easy removal so you put oil. But with the VC seal i wouldnt do it. If that's the case, the sealant would not stick anyway. You need a clean...

1.clean everything: dust dirt grease and old bond
2.put new seal into the cover that you took off. And press it in.
3. Clean the bolts and seals that tighten the cover
4. Put 4dabs of sealant...

Aznalex. I have looked at the service manual and it has the same photo on page 6-46. But the best way to explain to you exactly where to put the dabs goes like this:
The part where the seal sits is...

Thanks. just 1dab each at the corners?

Still not sure where to apply it. On the actual cover, or the engine itself.? Also, do i do it onto the rubber, or onto the metal part?

Hey guys,

I'm going to replace my seal on my 02 Dc5R. I know how to do it all, but i am not sure how to apply the sealant.
Is a sealant really necessary? And where do you apply it?
Somewhere i...

fixed

Hey guys, I'm going to flush all of the fluids in my car sometime soon.
I've got a dc5 Type R.

What brands do you guys use for power steering, clutch, brake, coolant, engine oil etc.

My...

Just realised. The JDM model has auto climate control which the Audm does not have. Would anyone know how to wire this up onto the Audm system?

Does that mean that the cluster would have a temperature reading. Or is that for climate control adjusting settings.

Hey guys. I am wrecking a JDM dc5 and putting it's parts on to my Audm dc5.

I stripped the radiator, air condensor etc and found a few things that the AUDM does not have.

1. I'm not 100% but...

You reckon? I was thinking maybe i should use it on my car and sell the AUDM one. Would $300 be reasonable for that one or around $500 for that too?

Yes true, Thanks for the rear bar update. Just realised :)

Hey guys i have an AUDM DC5R that i will be keeping. I also have a JDM DC5R that is a rolling shell that i want to benefit from.

I will already be using the Brembo brakes and 17inch rims.
I have...

This has happened with my uncle's 4x4. Brake fluid was leaking onto his clutch or master cylinder or something. Each time he used brake cleaner at the area, his clutch would not slip for about 30...

I have a dc5R brake setup with Dba slotted rotors (newly replaced) for fronts. and ferodo ds 2500 pads all over (newly replaced). Pm if you are interested. Regarding your question I'm not sure if it...

Hey guys. I have a dc5 Type R from Australia. and i have a rolling shell that is from Japan of the same dc5 Type R. I want to benefit from the rolling shell.

What parts can i benefit from the Jap...

ohk great. Thanks Curtis

I may be updating to a JDM brembo kit so i will be taking out the driveshafts etc anyway and replacing it with the JDM edition. I will change the seal then. After finishing everything, how can i...

not when stationary. But 1 engine mount is cracked which causes vibration while driving and while idling. So because of that vibration, it's not possible to hear any other vibrations. I will change...

I have no clue bro.. Could it be a driveshaft seal?

http://img818.imageshack.us/img818/6443/20130419164532.jpg