No it wouldn't be easy since stock wheels have 55+ offset and u have at least 2 inches sticking out for both front and rear wheels so need roll guards especially the back, camber arms as well as...
I will be opting for the spring shock combo since i would not be getting my car on the track, and since my setup for the car is for a daily so therefore i...
I'm currently questioning if i should get the eibach pro-kit since they are pretty trustworthy but , just want to ask does it actually kill the shock absorbers? and if it does how long...
Well for a fact i know 18X9 et+ 35 fits on the cu2 but it also depends on the wheel design, but based on the specs it should be fine with brake clearance.
Yepppp im using this configuration atm as long as you change all four tyres or it will change your fuel economy due to the slightest difference in wheel height.
You can try bridges tones potenza re002 235/40 r18s or the S001 235/45 r18 both are pretty good or an alternative is the nitto in so.... Apparently they r pretty quiet and grippy
That would require a bit more work since the cl9 doesnt have the big arches as the cu2 does but it should be fine the car is not lowered too much, if you want to go lower might need guard rolling and...
That should be fine as the width is only half inches wider and also the offset is not too aggressive so minimal work can be done to fit them. Done even need guard rolling!!
That should be fine as the width is only half inches wider and also the offset is not too aggressive so minimal work can be done to fit them. Done even need guard rolling!!
Or the other answer is that honda uses planetary gears rather than coventional gears so to give small engines a better torque ratio, and that sound might be planetary gear changing, this also happens...
Yeh they do for example look at ed_423 s euro he has 19x9.5 forgestar cf10 rims and it fits perfectly or look at euro noobs euro also with 19 inch rays te37 with et22+ soo yeh
need your expertise again, um how much does 30mm poke look like on a car??... as in can you guys show me how it looks cos im going to get these wheels on the cu2 that will poke out 30mm...