Search:

Yes if you are using USDM k20 civic SI intake on FN2r , you need battery relocation kit

You dont need to relocate the battery for the injen fn2 cai kit.
Direct bolt on set up.

Yes you can run PRB manifold without any problem
We got tps sensor in stock at JDMyard.

We got Bride side mount seat rails in stock at JDMyard to suit bucket seats
What sort of seat you got there ?

http://www.jdmyard.com/index.php?route=product/product&filter_name=ssb&product_id=56

1.7 kg battery!!!
450cca

We are using it on our Time Attack EG.
Alot better than PC680.

Contact JDMyard for it.

We got oem honda facia in stock at jdmyard
http://www.jdmyard.com/index.php?route=product/product&page=2&manufacturer_id=23&product_id=141

Our simple built NA k24a3 block and head with the usual cams , piston , rods produce 210kw@wheels without a ported head
To crack 12s its not hard at all even in with a full trim. Been there done...

We can get you J's racing fenders
We are J's racing dealer

Yes you need to port match the RBC or RRC intake manifold to 70mm throttle body
Also throttle body adaptor is needed

We should have them in stock at jdmyard

Adrian @ SAS

Nice pics.
Great event

Nice project . Good to see it going faster and faster

FN2R with simple mods = fun car to drive on the road and on race track
I got tegiwa header on stock catback + k&n panel filter on stock air box + Intake tract + Flash pro and tuned ( 133.3kw@wheels...

K swap header needed

Yes it is private group only

We got goodridge braided brake lines in stock

Sohc 28mm
dohv vtec 32mm

Most aftermarket radiator size are 32mm

We are using Competition Clutch Twin Plate on our DC5 Time Attack car.
Never had any problem with B and K series Stage 1 ( stock replacement ) / Stage 2 and Stage 4.

32mm on dc2

Change your suspension bushings too ( front lca bushings , front compliance bushings , rear trailing arm bushings , rear lca bushings etc )
EK is over 10 years old , fresh bushings will stiffen up...

Get a plm toda replica header.
tri y header design wont give you a good ground clearance on b16a.
http://img.photobucket.com/albums/v677/YonasLiu/yonas13.jpg

Yes it will fit . No problem at all

We always got HAMP oil filter in stock
We've been using this oil filter for over 10 years without any issue.
http://www.jdmyard.com/index.php?route=product/product&product_id=432