Search:
Type: Posts; User: krasyvy ; Keyword(s):
Search :
Search took 0.01 seconds.
So I swapped in a B16a from Japan and dont know what has been replaced and what hasn't (in terms of belts etc.)
How should I treat the next service? The engine has done 140k. Should I treat it as...
where can i buy this? at a honda dealer?
how much is it?
Not buckled. I dont know if they have been balanced, I guess I better go and get them balanced and aligned.
So I replaced my steelies with some honda alloys (used rubber) with tyres all the same size and now my car constantly pulls to the left really hard.
I tried rotating the tyres but that didn't fix...
What is involved in making this work?
about the timing belt, do i need to take it to a mechanic to change it? as far as i know that if u change the timing belt you need to time it as well?!
hi guys!
my car is turning 100k soon and i want to service it my self, im the first owner of the car and since i bought this car back in 2003 i always take it to the dealer for service. i made a...
seems like most of his replies on these forums are full of 'attitude' :rolleyes:
ok, so they function the same for all cars including hondas?
cool thanks mate.
cant find much info about this
what is the IACV'S function and how does it work?
lil confused -
his car was running fine with his p30, then u put in ur chipped p72 and it idles funny?
did u reset the ecu?
the voltages were fine and didn't cause a problem.
any ideas on what i've done with the iacv?
another thing about the hunting idle is that it ONLY occurs when the engine warms up.
it will rev and idle fine when cold but after running for a little while it will start hunting.
BUMPO.
I've wired the blue/yellow wire directly to A9 on the ECU and the black.yellow wire directly to IG2 so i know the wiring it PERFECT for the IACV.
It stills gives me code 14.
Can...
would supplying 12v to the blue/yellow pin on the iacv also supply 12v to the black/yellow pin?
because this is whats happening for me at the moment.
the only reason i think that the ecu is throwing me all messed up codes is because i tested the wiring to the iacv.
what i did was got an IACV that i knew worked fine..
its got 2 wires coming...
To clear up Fitv was fine no probs. It is not the prob
adjusted just to be sure as a check
OK just to update. After checking the ECU codes...14(IACV) and 8(TDC sensor)
Went down to Hannys to get dizzy checked out.
Robert told me the dizzy looked fine-the bearing inside dizzy would...
bump for an old thread - since i bought an ecu from the states i can just ignore this code right?
from what Vt3c has said it affects idle, but others said it doens't.
my idle is shit right...
you could always turn the crank with a breaker bar and see/listen for yourself where the sound is coming from
RHS?
do you mean short out the 10 pin connector on the drivers side of the engine bay?
What does that affect?
And yes, that has been done.
Might call hanny's tomorrow, see what they...
yeah I am - I read that the p28 shouldn't cause problems
http://www.d-series.org/forums/showthread.php?t=30063
but I dont really know how good their advice is; wether it's experience or...
» Recent Threads
Wobbling Brakes
26-04-2024 12:20 PM
26-04-2024 12:20 PM
0 Replies 328 Views