Search:

hey wow sorry, been so long. i have new suspension now which has the front around the same stiffness but rear is a fair bit stiffer. not particularly for drag, but it should be more suitable.

ive...

i would assume you would get to 400 hp less safe with e85 due to the fact that it would burn slower and need more timing for the same power. which means more cylinder pressure on the up stroke and at...

i would suggest making power with as little ignition timing as possible.. you really want to lower your cylinder pressures near tdc even if you have plenty of room for more timing..

big laggy...

first post updated with vid

tire will probably be mickey thompson et street radial II 225/50/15

i'll drive it to and from the track with those on also, just change pressure there then pump it up a bit before i leave.

so...

This thread will be to track my progress as i try to reach into the 10's on street tyres.

I think at the moment the Australian street tyre fwd time is around 11.2 seconds. which was set a number...

i'll leave this thread alone till i get engine upgrades. aka new downpipe, turbine housing and turbo to intercooler pipe upgrade from 2 to 2.5 inch.

so your saying that no matter how much ignition timing you take out on low cam(which im assuming is the cam your worried about) that it will ping? can you please explain that, it does not make sense...

the reason they aren't any good is because they are just a general tune. its not specific to your complete setup.

everything may be tunable, but not by you or anyone else after the chip is...

DSS 3.9

suppose to be 600hp rated and come with hubs.

bring on my damn axles!! grrrrr if they ever arrive lol
traction control is in a box at my house waiting for my return :D

should have full boost just after 5 i would say..

gtrs 200kw at wheels?

hmm never showed you guys my power. at hi power with fuel only tuned, and timing conservitive... turns out not as conservitave as i thought! lol
...

if you were staying on pump fuel i wouldnt bother with cop. but maybe e85 with a ton of fuel or race fuel with a ton of fuel might need it.

my standard system has always worked without a hitch to...

noooo! no vtec :(

its not lean is it?

do you have the o2 sensor hooked up??

bp ultimate

drags will be at least 4 weeks away. gotta order axles and i wont be back from work till about the 26th of this month. i really hope i can get to the track my next time home...
...

car makes 430whp on 18psi with about 25psi in the mid range.

no more boost could be made on the top end due to backpressure. an upgrade to turbine housing and a new downpipe will solve this i...

Tune locked in for Saturday!!! :)

if you guys want,,...

go to hondata dot com

and download smanager 2.0 for s300

i'll take some datalogs and you can 'play' the datalog back to watch it in real time..

did a log tonight of...

omg might be getting tuned today!

so sneaky with the water to air :thumbsup:

i dont like having the oil take 15min to get up to temp while the water gets up to temp in 5 or less. thermostat or not, the oil wont heat up at the same speed as the water unless you have the oem...

my car has been sitting around lonely while i was working up in gladstone. i had an issue with my tacho jumping while accelerating hard. turns out it was a loose connection to my icm. i just had to...

what i would have thought is that you want your suspension angles of arms etc to be at standard positions using shocks that like to work in that range which match your spring rates, and springs that...