Search:

I fitted coilovers on my 2005 civic hatch and I have the tie rod end issue.
you have mention that it will need front tie rod ends from dc5/ep3 to fit the front
Do they have the same thread...

2707627075

I fitted coilovers on my 2005 civic hatch and have an issue with outer tie rod end.
The hole for the outer tie rod end on the coilovers is bigger than OEM which causes the outer tie...

Hi

I just bought a headunit to replace my OEM one but I can't figure out how to remove the OEM unit. I can't find anything on the web either. I can find one for manual transmission but not auto....

yeh as it's 4 door, more practical. I heard that EU3 chassis is different to EP3 R so engine wont fit. Is this true?

if over 10k I wouldn't bother but if under definitely consider

You have done type R conversion for EU3?

If Type R conversion for EU3 was affordable it's best option for me.

My wife doesn't drive tho the car's hers. I sold my DC5S a while ago n I thinkin of either keep EU3 or sell n buy current JAZZ vtis. Can't buy EP3R as it's only 3doors. Not suitable for baby. Oh I...

yeh my in law spent 3.5k for transmission rebuild at honda last year when the mission was gone for gd. shud've done manual conversion. I can get silver's neo coilovers for 1050 from streettuned.com....

yeh i'm jus thinkin of gettin coilovers n dump it down if type r conversion is way out of budget. sick of drivin this car the way it is. 4sp auto, worst handlin n shit brakes.

she bought it 10 yrs ago. I didn't kno her by then.

Has any done type R conversion for EP3 civic?
I can't seemed to find one.
Thinking of doin full type R conversion for my wife's 1.7 4sp auto civic.
Seriously this is the gayest civic out of all...

Ok. thanks

Just bought steering rack. Is it easier to replace the whole rack or inner tie rod only? Coz I only need to replace driver side inner tie rod.

For those who has no experiences or don't know the...

Y wud I ask here? I don't wanna pay ridiculously to any mechanic who can't do a gd job.

I'm quite sure it's driver side inner tie rod. when the car is jacked up I tried to move my wheel left to right and there's some play on the driver side. Also there's knocking when steering wheel...

Hi

I think I need to replace inner tie rod as I here some knocking when I jack up the car and shake my right wheel.
Can anyone replace my inner tie rod right for my 97 EK?
thanks

I haven't checked my fuse box yet but my brake light's are working fine. thanks anyway

Hi guys

After doing B18c conversion on my EK my interior light and horn's not working.
Can someone indicate where the cables are located?
Appreciate your help

Hi guys.

Does anyone know where I can get engine shipping and how much does it cost?
cheers

Not sure if this is the info we need?

OBD1 motor into OBD2 car

Method 1

1. Use an OBD2-1 ECU harness with a P28 chipped, P30, or P72 for B18C1
2. Use either an OBD1 B16A distributor with an...

Hi guys
Most people know B16a engines idle problems are common and here is mine having jumping idle up and down. Engine light is on.
I'm reading the following codes
3 MAP sensor
7 TPS sensor
10...

you know all the buttons to control a/c bellow head unit. There's no light on the buttons

- receiver drier
- hi/lo pressure switch loom
where abouts are these located?
Are they inside the car or under the hood?
Also there isn't any lights on the buttons on aircon control unit

Hi all
I got aircon installed on my EK at Hontoys costing 500 bucks and there's no power. Installation included aircon compressor, condensor and all the pipes connected. I haven't done regas yet but...