Search:

Just few inputs

Spark can be breaking (maybe haven't been replaced)
AFM (if it has one) / MAF / MAP can be dirty or faulty
Air/Fuel ratio
Ignition timing ? if it has been played around?

But...

Wohoo my accord runs the same setup as DL001



http://www.youtube.com/watch?v=ldY7G9hRso0

One Behind (and slightly under) the main fuse box under hood, you need to remove the fuse box.
One Underneath your injector resistor pack (around where the cruise control module/motor is on...

I like this thread.

More pictures please preferably on CD5's

Never looked at speed at track nor rpm, always concentrating on next corner.

You're only a dick head if you tell everyone you're going hoon, otherwise meh.

This post is a troll

Poor grammar.

1. Those look like a stock exhaust manifold 4-2-1 style just painted with high temp blue
2. Muffler depends on how much you want to spend, choose a sound you like within your...

Damn F22B1 is a strong motor, it will like the magnatec and + it's summer now.

Oil viscosity depends the mileage your motor has done and the condition. If it is high 1xx xxx or burning oil, 20w50 is suitable, if it's in great nick 10w40/5w30. Oil brand depends on personal...

There are two filters in general for most cars, one is mounted on the fuel pump inside the tank (which is hardly touched unless you're changing the pump) and one before your fuel injector rail. You...

Time and money wasting. Hondata S300 is about $750AUD sourced from US installed on P28 board. Apexi PFC is about $1200AUD. Gains - 5kw on butt dyno if there is no use for it i.e. no supporting mods....

Hi guys might post here fyi, Mo (member from ozaccord) and myself took the liberty to get custom rear sway bar made for our car (CD5). So we sent a sample and they document the stock bar yadayadayada...

CAD - Computer Aided Design. Just so I can join the band wagon and repeat.

Yep, 3/4 forums im in so far; antilag.com preludeaustralia.com and ozhonda.com all attacked.

Common thing? they have just car, go2space, mothers as banner.

People corner faster with a little bit of oversteer, thus thick rear sway bar will cause it to 3 wheel and oversteer a bit. It's good.

Front top hat bush (strut top) is wearing a bit. It's normal due to its age and most probs suspension tower assembly never been changed.

Temporary fix - spray some lithium or silicon grease on it...

NOS, $700. Enough Said

Yow, tell us how u went!!! I would like to see some nice numbers, we could buddy up sometime.

Defo need a calibration in the pfc, 3 bar map sensor outputs different voltage reading.

You've missed:

BC Racing Coilover
Silk Road
Pedders
King Springs

I personally used BC myself and bang for buck handling at track for $1200, damper adjustment and full ride height adjustable...

http://img.skitch.com/20090310-fue4arsbcqnqj5q9327sc2gd46.jpg

So you made a thread.

Please check the tab as shown below on your s300. Increase your idle speed from the point of above 100*F. Also increase the IAC duty a bit. If your idle isn't hunting, it rules out FITV blockage....

Just, please just don't try to make it 'sound' a manual by backing off your accelerator pedal before it shifts like some kids do.

Cool story bro. Welcome to the internet.

Any brake shop can source one. Pretty sure you can source DBA or RDA brand about $140 a pair.

Yes, the honda engineers didn't think it through on our CD model. So we're stuck with Hub over rotor design. ONE DISCREPANCY that guy must be full of shit as 90% shops in australia would machine the...