Hmmm, cash laying around ah? Tell us where and we will give you a hand to pick it up.
I would think the reason you wanna to stiffen the chassis is for improved handling, the biggest improvement I...
The engine doesn't have power steering or air conditioning, the crank pulley is only driving one item which is the alternator. the high pitched noise only appear at constant idle at around ~750, it...
am getting a high pitched whistling noise from my H22A engine, it only happens when the engine is at idle, as soon as the rev change, the noise goes away. i can't pin point where the noise is coming...
I took PS off my EG after installing the H22A, it made the engine bay look a lot cleaner, thats about the only benefit i felt, i have 205/15s in the front, i wish i kept PS but, it made the car more...
Replacing ITR MC on a standard EG won't be beneficial, standard EG use a 13/16" or 7/8" MC and small calipers, putting a 1" MC will give you very firm brake pedal. only time you need a bigger MC is...
Next to you brake booster there should be a smaller plastic reservior with a grey cap on it, open the cap and see if there are fluid in it, there is a line on it where the brake fluid should sit,...
yeah thats right, check the fluid level first, i had the same problem some time ago, my clutch was a bit softer than normal, checked fluid level, it was almost empty, topped up and gave few pumps of...
what model CRV is it? i don't think i recall a CRV with 4 studs. but regardless which set up you doing, if you decide to run a CRV, legend or a dc2r caliper, MC upgrade is a must, 1" will be ideal,...
i don't know what you are asking, and i don't know what you are talking about, read my posts carefully and fully, try to understand it, in my original post i clearly indicated brakes are unsprung...
thats incorrect, Unsprung weight is a mass which has its own inherent inertia separate from the rest of the vehicle, is the portion of a vehicle that is not supported by the suspension including...
The hub of the CRV is a direct bolt on for the EG, given it's the 96-01 model, you would need to run a 36mm outer cv joint, EG is 32mm. if you only talking about the caliper and disk then it wouldn't...