Search:

Amen to that.

Glad to get a new pb, but overall was a pretty frustrating day for me. Gotta get some consistency with my braking. See everyone out there next time. :)

Yeah. If it was me I'd go for some different rims too. Apart from that looks good. Welcome.

I'd much rather use a cheap impact driver. When you're doing screws the point is that your applying pressure inwards when you hit the impact driver rather than just sideways if you're using a rattle...

Shortening the belt isn't going to make it spin faster. The pulley ratio is still the same. I've done it. I can't think of any negative effects.

It's not really about the pressure as far as I'm aware. 140psi is pretty frikn high. Most tools work at around 90psi and the high volume low pressure spray guns work at less than that I think. The...

Long socket with a breaker bar/ratchet/torque wrench. One of those cheap torque wrenches from supercheap with the built in ratchet would probably be a good idea.

This is another option. http://www.holdmyphone.com.au/

They sell clips specific to car models so that you don't have to drill into your dash. Then you can mount whatever you want to them.

Good...

Ta. Pretty sure I know what you mean and I think I gave it a bit of a half hearted try yesterday. Looks like there isn't a magical fix that I didn't know about. Will just have to try some combination...

Yeah tried both ways. One way works better than the other. But still a few mm off.

Thanks guys. Yeah. Tried that. Didn't get any noticeable movement. Might try leaving it for a few hours like that.



Thanks. Doesn't really help in this case though because it is a chassis brace...

Did the clutch on the EM1 on the weekend and removed the stock upper chassis brace in the process. Problem is now I can't get it back on. Is there a trick to this? The holes are probably 4mm or so...

Honda Parts (better load the trailer up with cash first though)

Wreckers up here charge $160 for ECU's.

I thought it was a sprint track times list. Not SAS times list. As long as the specs are listed with the time I don't see why the time shouldn't be there. I'd much rather have it listed as it is a...

It's probably just condensation

haha. new I shouldn't have posted before you did. Good to know.

Listen to ECU-MAN...

Boss Wrecking in Brisbane. Not sure if they ship. Might cost more if they have to take them off aswell. cb7_owner is selling some calipers atm with cb9 brackets that I got at the same time as spares.

Part number 1. 2 is the wheel bearing. :) Just make sure you get the right hub from the 2.3CL not the 3L.

Definitely the best honda dealer I've been to in Brisbane. Only talking about the parts dept though.

Blue Ribbon out at ipswich have been good the couple of times I've been there too. They have...

Yep. Definitely have to take the entire gauge/heater/stereo surround off. You have to be very careful if you don't want to break it. I've been through 3 of them. From what I remember there are some...

Yeah righto. Thanks guys. Its a h22a box so cable shift.

Just wondering if there are any tests you can do or inspections to make on a gearbox that is out of a car that I'm looking to buy? Short of taking it apart. It is LSD aswell so anything I can do on...

Not sure. I just got them off other hondas at the wreckers.

Awesome. Great to see more CB's kicking around. Can't wait to see power figures. Check out ozaccord. ;)

I wouldn't bother. They look ok but that's about it. I've fitted one to my cb after alot of stuffing around. The upper support is ok. But the hip support isn't that great. Not that comfy either.