Thanks everyone, especially Gary (SydneyKid). That's the kind of feedback I needed. I'm going to get the car back onto a hoist to see if I can fit the old bar back on.
Check out the past events section, vic bushfire charity- you'll see my red EG with 15x8 +15. Only 1 deg neg camber front, 1.5 rear. Lowered on coilovers, 195/50/15 Goodyear Eagle F1's. Does not have...
Great, thanks for your input. You both seem to understand exactly what I'm aiming for, and I'm sure you've both got killer setups, good to hear some experienced feedback.
I've been offered a set of 40mm throttle bodies etc, without a manifold, to go onto my B16A. One thing i just can't find is the port sizes for a std intake manifold. The reason I wanted...
Where do you find ECU wiring diagrams? I don't have much experience with Honda computers (others yes, Honda no) so how can I find an ECU pinout which has all ECU wiring explained?I only...
My EG Si hatch runs coilovers wound almost all the way down on 15x7 (+40) SSR Type C. They never scrape or scrub and run Bridgestone 195/50/15 with a bit of sidewall stretch-looks hot and handles...
Does it happen at idle? My EG makes a weird squeeling sound, and it is not from the extractors. Mine seems to come from behind the instrument cluster, like maybe near the master cylinder maybe. Never...
I have the kit that conects to the battery via a small sealed box with wires running around the engine bay. There is a fuse on the power wire, and everything has...
Thanks Bennjamin, I've taken the kit out twice and I can't see any wires touching or earthing out anywhere. The ballasts are mounted firm and the wires are cable tied and wrapped in split...
I put the normal 10A dash fuse back in, the dash lights went back to normal, so no damaged wires. It's a bit strange... I'll check the parker wires for any damages...
Guys, I recently dropped in a set of H4 Hi/lo Xenon lights into my EG. They're very cool and light up real nice. But they blow the dash lights out. I've changed the instrument cluster fuses from the...
Guys I can get a set of 4th gen Prelude front seats for a good price, but I'm not sure if they'll be hard to fit. I've measured them for overall size and they seem okay but just wanted to know if...
I'm from Autobarn in Sunshine (Victoria) and unfortunately our electrical fitter is leaving. He's only here for one more week so I need to find a replacement fitter ASAP. If you are, or...