fuel would be my first guess!! what you running at the moment?
Under low RPM pinging is bad enough to begin chipping at the top of your pistons :S you did the right thing by retarding the timing....
Are you reffering to a noise like coins in a coffee can? I've been hearing it in my car lately and I run BP ultimate and it happens ~2500-3000RPM and under load.
I think a batch of shit fuel must...
For an EG with a bseries motor a dual core radiator from a 2nd gen CRX will do. This a straight bolt on.
You can also try to fit an integra radiator but you'll need custom mounts and to run AC...
A stock R maybe! But an ITR with same mods as you and the right tuning will allways be ahead of you in power :S
You need to take advantage of your chasiss by dropping as much weight as possible. ...
I think thats very good power for a stock AUDM block. It proves that with a B18c6 good numbers can be had with modified head and bolt-ons!!
Do you know what settings your cam gears are set at?...
IMO any SRI that uses the Venturi (sp?) effect to induct air into the motor works just as good if not better than a generic short ram. That's why I like the Top fuel/J's racing intake.
B18C's are very strong motors, just make sure you replace the oil after you track it:thumbsup: :thumbsup: I would at least get a better set of tires and a good wheel alignment. Better brakes, bars,...
http://www.ozhonda.com/forum/vbgarage.php?do=getimage&id=685
Toda B cam
Toda cam gear
Toda valve spring
Mugen headgasket
Port & polish head
70mm throttle body
Fuel regulator
Hotwire...
I was always under the impression that the tanabe hyper was very quiet. I was considering going for exactly the same setup you have ,after reading this I might just think twice about it :S
My mate drives a rexxie and I reckon they're nice cars outta the show room. I wont say whether or not I can beat him but one thing I will say is that regardless whether I like his car or not rexxies...