Search:

A few more videos


https://www.youtube.com/watch?v=AuCexlzlWlQ


https://www.youtube.com/watch?v=QQyiXqVlA8A


https://www.youtube.com/watch?v=i2KNFWW-PV4

No idea on on both accounts as I am yet to test them out, seems to be a worth while mod from what i've read

http://farm7.static.flickr.com/6105/6279163442_2188b18c59_b.jpg

Cusco Brake Stopper

As mentioned above try graphite powder or silicon spray first, I had a similar issue with my em1.

Initially I thought that it'd be the regulator as well but I took a closer look and the window had...

New headers (Fujitsubo SuperEX) installed:

http://farm7.static.flickr.com/6240/6219764431_da89fb9ca2_b.jpg

Also had a high flow cat and a Mugen TwinLoop go in today as well.

Crazy sounding car!

Here are a few shots of it for those who missed out on the day.

http://farm7.static.flickr.com/6090/6045368164_2227606ea9_b.jpg
...

Thank you to all that have replied! It's a B18C7 in a em1.

I'm pretty certain that there is a charcoal canister there with all it's connections in place, that said I didn't really have a very...

Hey all,

If someone could tell me what the thing circled in red is and what it does that would great! Bonus points for telling me what the hoses (the ones that are plugged in by screws) should be...

Not too sure about the height but they are interchangeable.

It's pretty easy to make you're own kit. I did using some 0awg and 4awg cables and a distro block.

Removed factory ground and replaced it with a 0awg.
Added another 0awg but then ran it into a...

Have you taken out the clip which actually holds the handle onto the door?

The superglue could just be to hold the handle together, unless the installer has glued the socket into the pin...

For those who are really fussy you can add in another step too. Polish using Autosol Metal polish then finish up with PlastX. Autosol is more abrasive than the PlastX so it clears up sanding marks...

The parcel tray is held in by clips, just have to find the right ones and unclip them from underneath.

It depends on the head unit, generally Pioneer headunits have a single wire for both the antenna and amp trigger, which is a bit of an annoyance as the antenna will go up regardless of whatever...

Have you actually listened to any of those products?

The sound that is reproduced from different speakers can vary vastly between models let alone manufacturers. If you're just going by what...

Is the sub a dual 4ohm or dual 2ohm?

If it's a dual 4ohm then you can only run it at either 2ohm or 8 ohms.
Dual 2: then its just 1 or 4ohm.

Lets assume its a dual 4ohm sub, personally i'd be...

Only brand which springs to mind is VDO Dayton, although i'm not too sure if they still make the units or not.

haha, beat ya to it!

I have to disagree with aaronng on the sound, "sounds very nice" is just too much of an understatement for me :p

The Toyota Crown as a V12 but it sure as hell isn't going to be beating a lot of the current sport cars.

Another vid:
http://www.youtube.com/watch?v=B0OTEZDAb9c

It's looks like a collection...

Tacho
Passenger airbag
Rear Disc brakes (CXi has drums for the rear)

Can't remember if there was anything else. My GLi has power windows although they may have been an optional upgrade but i'm...

FHRX Studios in Caringbah :thumbsup:

Saxman!!!

In the process of doing this, well getting everything i need for it. Went with TYC Projector headlights and looking to get a Bosch HID Kit (Projector, ballast, bulb, ignitors), the Bosch package...

Only problem is trying to do a proper Hi/low retrofit unless you don't mind not having hi-beams. Gotta admit though I like retrofits.... still on my "to do" list

I read this a couple times and it still doesn't seem right to me. I've always preferred to have the amp more powerful than the sub where possible, this way you'll know that you'll be providing enough...