There is a yellow two pin plug that connects to the underdash fuse box. Use this to reset the SRS first then recheck the codes.
If the code just came on, I would say something else broke such as...
I've had this issue before and it turned out to be an internal ecu fault. Its called a solid CEL. Since you're in SA, send your ecu to ECU-MAN and he'll fix it. He fixed mine.
I have no idea what fastbrakes.com rotors are but check the hub bore on the rotor vs. the DA hub. If you have type r rotors on the DA hub without a centering ring, your rotors wont sit right...
You dont need to take the crank pulley off. Just undo the black chain tensioner cover, lock the tensioner and then proceed with taking off the cam and gear. You will need to keep tension on the chain...
Make a bracket and mount the adaptor to the side of the gearbox, thats how I have done it in a CRX and DA. Also, if you have climate control, the hush and suja kits dont work, theres no room under...
Ive got a set of adjustable castor rods from my previous setup that I can sell you, it will allow a fair bit of castor adjustment. Im using a ktuned traction bar with heim joints, its noisy but solid
My custom 3" exhaust from Westside. Its a flawless job, he installed multiple flanges, new stainless steel bolts, new rubber hangers and made it exactly to my needs. Ive been to other places and...
I would never swap an entire chassis and engine harness, there will an exponential increase in problems. Use the conversion harness or just do it yourself (not hard).
I have dc2r suspension on my da6. I've had both Tein Type Flex and Omni power full bodied coilovers. They feel great but the difference in shock length will piss you off.
Hey Steve
You need to adjust the brake booster rod to get rid of the pedal slop. People normally change the mc and booster so they don't get this prob.
In the pic below, you will need to loosen the...
Has anyone seen a digital climate control from the jdm spec integra's anywhere? Wreckers or someones front yard? Mine took a dump and it's been a mission finding a replacement.
I'm using an aeromotive a1000-6 fpr, you only need that single Russell fitting to suit the stock fuel rail, otherwise I used the Hybrid racing kit, then chopped it up to extend some lines to hide the...