If staying with stock power, Id just go with the Exedy kit, if you are going with more down the track maybe ACT HDSS kit with OEM disk from the US, Im at 260ish rwkw and is holding up nicely. Also...
For those with the Greddy kit, go to s2ki and ask politely for a unlocked basemap in the forced induction section. Plenty of guys have it there. I would help but I am on AEM EMS.Then go to your tuner...
Mine was purchased from the US. Im pretty sure it isnt the ULT as we had the same thing happen with an AEM EMS. The log manifold, small turbo and small downpipe is quite restrictive, bring the car to...
The log manifold and small turbo+downpipe is really restrictive and causes the vtec drop in power, raise vtec to around 7400rpms and you should be good to go. Also get yourself a free flowing exhaust...
I have the Greddy kit although quite heavily modded now. We had similar issues to you, car would hit Vtec and lose considerable power. This happened with both the emanage ULTand the...
You are right, its definitely not an option for those who daily drive high kms. My S is just a weekend car and so far Im using about 30% more fuel compared to when I was at 12psi on ULT98. C16 was an...
From memory some of the LS1 LS2 turbo guys in NSW are running E85, I reckon there are 4 or 5 servos that carry E85 over in NSW. From memory some Enhance petroleum and United petrolroleum.
carsales.com.au have a bucketload of them. You should easily pick one up below $30k. I picked mine up for $24k with 91k kms and a hardtop. Take your time and test drive as many as you can till you...
Try searching for a secondhand one, usually can be found for pretty cheap :) Not sure about power gains but when i was NA you could most definiately hear it.
I agree that its almost all in the tune. Im running 15psi with a greddy T518z in an s2000 on stock compression. Should be looking at a ECR of around 21-22. The car runs great thanks to the boys at...
Maybe check to see if you have a local exhuast pipe manufacturer around the place and get them to make one up for you just how you want it? Thats what I did , turned out a lot cheaper and just how I...