Search:

Bit of a random read out, but i'm assuming "Track" is "Toe" and -1 is toe out.

If your car is standard height and power i'd be running 0 Toe or maybe 0.5 max. Caster spread is also a bit...

Agry

http://www.ozhonda.com/forum/customavatars/avatar11984_27.gif

Look man, i'm just trying to help you (as are the other guys), but if you are just going to believe what a tyre shop told you a year ago then enjoy your tyre wear. And if someone told you that "your...

If the car is stock height and running more than 1.5 degrees camber then the upper arm bushings have failed or if camber is around 1 degree the alignment (toe setting) is not right.

Rather than...

Quality support work from pjari and cbauto

hehe

debatable

LOL, nah

Coilovers aren't for you if you have 20inch rims and a toddler in the back. Think about what you need to do with the car, just fit some lower springs.

Good feedback there :thumbsup:

What rear spring rate are you running?

I find that response is due to someone not having the chance to compare properly engineered and developed suspension with budget "one size fits all" coilovers...

Try something like Koni yellow...

Nice car, i like the rims too!

Is it just me or are the front wheels running Positive Camber?

Have you had a wheel alignment done?

Also, if the incorrect boot is used (too short or not large enough in diameter) they can come off the joint

The original top hats will not work with the diameter of the coilover springs and more than likely the shocks rod won't be long enough to go though anyway.

You will need to try and source a new...

Thanks for the comments guys :thumbsup:

OP, give me a call or come past the shop if you are in western Sydney - i can give you a couple of options to fit in with your budget

You should ask this in the gym junkies thread...

http://www.ozhonda.com/forum/showthread.php?27991-Any-Gym-Junkies-Here-**READ-RULES!**

I think energy suspension sell the small strut top rubbers, will make the ride firmer though...

Good work, keep us up to date

Around 1400 fitted i'd say

Hey mate, judging by your location you are in Penrith...

Take your car past Wholesale Suspension on Coreen Ave and have a chat to Josh, he'll give you a few options and some pricing so you can see...

I got excited when i saw this thread - i thought "Awesome! Someone is going to build a quality set-up with high quality parts..."

Then i saw its just about strut braces....
...

Really? Far out....low comp i could understand, but that still seems lean with a high comp n/a

Check your ball joints mate, they could need replacing

Its not a honda engine, but when i built my motor with billet rods and forged pistons, i threw it together in a garage then loaded a standard tune. Put normal semi-synthetic oil in and went for a...

Ultimately it comes down to who is doing the work and what you want as a result.

If you get a suspension specialist to do the install, there is nothing wrong with the Konis at all, we do it all...