Search:

Thanks, I'll search for it

I decided to try a p2t to see if it would fix my fuel economy and bad idling and other minor issues. It wont start with this ecu, I'm assuming its the immobiliser, starter motor works but engine...

So since fitting this ecu I am only getting about 250k's from a full tank.. the car is driven hard all the time either at the track or in the hills but with the p73 ecu I was still getting about 400...

That could be a possibility then, the cv's were changed just before I bought the car, but I doubt the axles were changed because I've heard only ef9 axles are anywhere close to the right length? Will...

Thanks for replies guys big help, not sure the part number will ask the mechanic, got a hydraulic press now so will do it myself next time anyway and make sure I use that part number. Pretty sure it...

Having a major headache with front wheel bearings on ef9, had them changed by a honda specialist mechanic and a week later there was play in the wheels again, so took it back and had them redone,...

I thinks that what I have done, no code when vtec engages, just did exactly what it says here, 28060

Jumped 2 wires on the ecu plugs to bypass it looking for the vtec pressure switch and everything works now, should have done this years ago, such a difference compared to the p73 ecu! The car finally...

Nevermind, I was looking at the plug lower down, here's a pic just to be sure anyway 28044

Found a few tutorials on making the ecu bypass it will give it a go tomorrow

Okay, makes sense, thanks. But from what I can see in the engine bay it looks like it does have a vtec pressure switch? I can take the plug off and there's oil inside.. Same on my obd0 b16a in my...

Is throwing code 22 VTEC pressure valve

Ended up buying a P30 ecu and now my check engine light is on, vtec not engaging lol... anyone know why this could be? Might have to get that p2t ecu off you kennee..

To pair the immobiliser do I just have to swap the immobiliser chips between the two ECU's? Seems the easiest option

Sorry, cleared now

How hard is it to pair the ECU to the immobiliser? Will try to google some of this.. also forgot to mention I found this on my p73 ecu and wondered who ECU-MAN was lol 27979

So does the code from EM1 and EK4 ecu's differ so I know which is which?

Finding lots for sale :) however there are a few variations, is p2t-003 the right one?

Thanks.. I will see if I have any better luck finding p2t

Today I discovered my ek4 (b16a2) is for some reason running a p73-003 ecu from a b18c, which would possibly explain the late vtec engagement point and bad fuel consumption. From what I understand...

they're out there! Here's my siR (ef9)

http://i81.photobucket.com/albums/j203/Flarry1/IMG_0627_zps89f9f1db.jpg
http://i81.photobucket.com/albums/j203/Flarry1/010420121378.jpg...

Thanks, thats excellent

Cool, thanks, DA integra hubs will be much easier to find.

http://www.ebay.com/itm/JDM-NTN-JAPANESE-PREMIUM-WHEEL-HUB-BEARING-42200-S04-008-HONDA-EF-EG-DEL-SOL-/260979284981?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3ACRX&hash=item3cc393dbf5&vxp=mtr ...

Recently have replaced front wheel bearings but there is still movement in the front hubs so I'm guessing it's the hubs and not bearings.... does anyone know what hubs will fit an EF9? It seems...

23659

My ef9 is missing most of the outer door trims but any other trim I can find doesn't match mine (pictured above).. I'm guessing maybe that trim only came on the Si and SiR models? Anyone...