Long story short, my radiator is cracked. EK1 hatch, ive just removed the radiator awaiting a new one. so when i go to put new coolant back in do i need to bleed it through or something like that. I...
Ill cut a long story short. There was a noiuse coming from the front brake pads so i took them out to check them, fitted them back in. Went for a drive and brake pedal went straight to the floor with...
i took the car in to get some new front tread, & the guys came back with me needing to replace my front bump stops, front & rear shocks. I have a funny feeling now, that its the shocks.
I have read that on wikipedia about the Y4s rods being longer. So honestly i think thats a typo, the Y4 is very similar to the Y8, bar vtec, its got none. same head design & size without vtec.
deffinately not cv joints, if it were them wouldnt i be able to hear them no matter what speed i am doing?! Anyway we checked the front, i double checked the cv joints, both inner & outer boots were...
ok well im kinda hoping its not CV joints. The outer boots have just been replaced when i got the gearbox fitted, so im certain the mech would have looked over the cv joints before doing the work.
...
It only seems to do it at one particular corner. when i turn this corner, no matter what speed, i hear this knocking sound (like a person knocking on a wooden door). It sounded like it was coming...
Well i got a reco'd gearbox fitted about 1300kms ago. new clutch & a lightened flywheel. I find if i shift rather quick into 2nd gear, itll grind a little, but this only happens while turning or...
I know plenty of D-guys boosting a high mileage motor, its all just how you drive it & look after it. If you look after it, itll look after you. & In saying that, i would just boost the D. Boost is...
cheers guys thanks for the info. There anr't alot of diagrams out there for the EK1 wiring, but i did stumble across the P2K ecu outputs on turbod16....
the only gauge holders i know of for EKs, are the A-pillar mounted ones & there's also one that fits around your cluster that houses 2 gauges though....
So, the Y4 is getting close to the stage that it needs to be rebuilt. So rather than rebuild it, i was going to look around for a D16Y8. This will be an easy swap, as the cars already got the same...
Your probably better off getting full stand-alone like an apexi PFC or something. here's why. The Y4 has a unique wiring system. so usually most OBD2 hondas have 3 plugs (that plug into the ecu),...
I think alot of the D-guys tap into the oil pan, then a t-piece where the oil sensor sits on the back of the block. Im unsure however, on the waterline. Im presuming this is for a turbo, is ur turbo...