Search:

Car is out of the garage pretty much ready for club reg just waiting for the time/$ to take it in and get it inspected. Drives well and im looking forward to competing in it.

did your tester seal properly? with that low under factory comp you should notice the difference

Well it seemed to work so ill rewire it. Thanks for your help.

if i short the grn/blk and the ylw together should the reverse lights come on?

I just wired it with the wires that came on the plug i bought from the wreckers which was red/wht and grn/blk. Red/wht goes to the ecu.

There is also a Grn/wht wire in D22 marked as sensor ground?

There are no grn/blk wires to the ecu. From looking at the pinout D12 or 2 depending on how you look at it is listed as brake switch?
I have already wired the ect and it made the cel go away so i...

Finally got the car to the point i was happy to take it for a drive!
It was only a few blocks but mostly to check if it pulled smoothly and didnt make any weird noises. Pulls great! feels quite...

its a 92 Del sol running a b20/18 i didnt do the conversion but id assume its the b16 loom obd1.

The Red/ White stripe Green/ Black stripe is confirmed ECT i rewired it and plugged and code is now...

Ok so the nuffie who owned the car before me decided it was a good idea to chop part of the loom so now im trying to work out which wires are for what. just want to double check what ive found on the...

Ok so I checked the codes and got the same 6 14 36 started to pull hair because i had already tested sensors and they were good then i decided to look into wiring and quickly found that there were a...

Well all seals etc have been done and ive bled the brakes. Started it up and bled the cooling system idle is alot better now still has a slight hunt in idle from 6-900 im guessing a vacuum leak...

sounds like an idle stepper issue or maybe there is a vacuum leak somewhere and once everything heats and expands it seals to the point it doesnt affect the idle? try making a vacuum tester and...

Hey another del sol owner, ive picked up a neglected one aswell with a few goodies but no electric top. Good to see another.

Yeah i think ill get the kit and give it a go, hopefully i can keep all the shavings out of the engine ill just tape everything up and go slow.

So in the proces of checking valve clearances i noticed one of the bolts on the cam retainer was loose. Looks like the previous owner has overtorqued and stripped the thread out of the hole and then...

Update time.

Been on holidays and busy with work so havent had alot of time to work on the car but its getting close now.
Seller for the camber arms said they are made to work with aftermarket...

awesome thats good news, thanks.

Hi Ive discovered my power steering rack is leaking before i go out and search for one i wanted to know are they identical between delsol crx and eg civic? and is dc2 integra the same?
thanks in...

To anyone interested i found them Honda has genuine ones they come standard on the H22 prelude

not the actual upper arm the part that connects the lower control to the upper, its curved and when you get to a point in the adjustment it rubs on the spring.

Ok got the drivers side all back together with the front camber arms, having an issue with adjusting the camber i cant get near maxing the arms out as the upper arm sits on the spring if i do :/ at...

UPdate, i was on holidays for a couple weeks so not alot happened, but ive ordered some front camber arms just waiting on them to put the driverside back together. also pulled apart most of the...

Hey guys in the middle of making a breather/catch can setup and was wondering if anyone knows where to get the fittings for the rear of the block?
...

Just wondering if camber arms between 92-00 civics are the same. some places say the same and some are stating 92-95 and 96-00 as different.
Cheers