Search:

Well The Personal Horn was too big and wouldn't sit flush with the spoon boss hub. So I was thinking about shaving abit of it off so it'd fit but I ended up mounting a NRG slim ver. quick release...

Can Admin close thread. Problem solved.

Hi,

As topic states I'm just wondering if the slim NRG quick release attaches to the spoon boss kit without any issues. I'm running a Personal Grinta 350mm and I've found out that the Personal...

Hrmmz.. You replaced it with an OEM? I just replaced my fan and thermostat to a J's racing one and I have the opposite problem.. my car warms up so quickly.. like from cold first start in the...

Yeah found out the wheel bearing was seized... all fixed up now.. wouldn't have been nice if the seller gave me a heads ups though.

I've got a set of 17x9 +18 Regamasters that I'll be posting up soon if your interested.

Yeah the trailing arm and brake assembly is off..

Hey guys,

I'm doing a 5lug conversion and I notice I can't spin one of the rear brake disc.. the other rear one spins fine.. Any thoughts?

Should it be alright after I install or is it seized?...

You should invest in a twin pump aluminium jack. Easy to lug around and a good investment.

Best to check all the bushes and bolts in the rear, as its the car is approaching 15yrs and somethings might need to be tighten or replaced.

If you want to save some money you could prep it yourself, sanding and rubbing the paint back so it's ready to paint. You would save abit and you'll have a nice finish considering you've done a good...

Yes you can.

You will need manual gbox, clutch n flywheel, clutch pedal, clutch master and slave, shift linkages, manual ecu. I think that's about it.

I have all of these for sale for d series....

+35 is the best for eg. Sits flush and don't need to roll the guards if you lower it at a sensible height.
If you dump it on its ass you will need to camber it in a bit and roll the guards a bit...

Why you need to bend the lines?

You can just bend them by hand if it's just a little bend..just to be carefully.

Otherwise pipe bender like the above post.

^^i had this problem with my sunroof.

Remove the roof lining and a pillar covers and find the water outlet hoses.

Make sure they're not blocked and are still running out to the fender.

If...

Probably a good idea to bump up the compression a couple of pts..maybe thinner HG.

Or if you wanna go all out get get high comp pistons.

Need high compression to take full advantage of cams.

Thanks heaps.

Thanks guys.

I've already got CTR rear bar with the lip so yeah..

just need the rear lights but im not fussed about that..

so it's just a matter of replacing guards,bonnet etc yeah?

I...

Hi guys,

I've been thinking about doing a facelift conversion.

Besides the obvious changes that need to be made;
Bonnet, headlights,fenders,front bumper.

Do you have to make any other...

check to see if the silicone hose you're using is compatible/recommended for use with radiator/coolant fluids it should be fine.