Search:

I would recommend reading "Competition Car Aerodynamics: A Practical Handbook"

http://www.k20a.org/forum/showthread.php?t=16428

I see. Was it the bolt spacing on the caliper which prevented you from running it on your current EF kunckle? DA6/9 kunckles, i forget which one was avail' in AUS, has the same bolt spacing as...

This information is correct, I have tried with EG\DC2. What was the reason for wanting to go down that path?

Above info is correct but you missed out that EG\DC2 shocks are longer on the front. This will give you a very crap feeling, trust me I know. Stick to ED\EF suspension.

K20 crank will work just need custom length rods.

If i understand your question correctly. EF9 control arms won't work with DC2R/EG6 suspension due to the eyelet being wider than an EF8/9 unit, not sure about control arm length.. tape measure?
...

You would be better off with a 3" exhaust and make sure the headers have a 3" collector. 140-150 should be easy.

you can use a crankshaft from a k24. There is some info on the internet.

Edit: here is a link - http://www.turbomagazine.com/tech/0609turp_honda_f20c_stroker_build/index.html

You could run it. You would need to use the EF front fork and possibly change the rear LCA depending on the style of the rear shock.

Personally I would buy EG/DC2 coilovers instead of using EF...

its not the weight difference that you are feeling in regards to the front and rear its the stroke length. If you are running a DC2/EG setup jack up your car and put the front and rear on jack...

Better to use proper EF9 suspension for the simple fact that EG/DC2 shocks are longer by one inch on the front. This will affect your car by...

Not allowing you to lower your car as much on the...

What is considered fast ?

crx or civic? ef civic rails are the same as aussie ed civic, ef crx is the same as ed crx

Good post, was thinking of machining as an option :thumbsup:

just use eg ones, I had eg rears on my car.

EG/DC2 trailing arm is the same so that will work.

Front knuckles are the issue. EG/DC2 etc arms are a different shape to EF ones, on my car im running 96 spec front knuckles and they add more...

Can be purchased through JDMyard, i'm using Bride seat rails.

ef camber kits are different to every other honda. Many japanese companies offer good quality camber kits for ef.

JDMyard. I use it in my EF works well

why not just buy a walbro for EF?

Olympic athletes don't run in gumboots :p we dont race on street tyres

Weight would be very similar due to sunroof in yonas' car

Daily driven

1.5 same for all hondas