honestly,
since i put the dc2r rear sway on my car, it now oversteers more than understeers,
i think i need a bigger front sway or an alignment to fix it up...
not more momentum, just takes less energy to spin the flywheel
i.e. you will accelerate (slightly) faster but will have (slightly) less momentum from the flywheel (i.e. less torque)
Gearboxes are compatible if both engines use the same type of gearbox. For the D-series there are 2 types, if you have the small bearing type, then your new motor needs to be compatible with the...
I had a similar problem and found that my lower ball joints and tie rod ends were screwed. After replacing these, the problem was gone.
Could be another possibility, and a cheap fix.
To be honest, the non-VTEC D16's aren't much slower than the D16Y's with VTEC (D16Y8, D16Y1), there is hardly any difference between them.
The sound of the VTEC crossover is really the only...
Does anyone know if the b pipe from a DC2 or an EK hatch/sedan will fit okay with the coupes?
It doesn't have to be perfect, but if its almost right it shouldn't be hard to get a custom axle back...
if its the thrust bearing it should only happen when the clutch is pushed in
if it happens while the clutch is not pushed in, it may be something else i.e gearbox or could be flywheel bearing
i got...
lay a few big towels out on your carpet and put something heavy like a bag of potatoes or something on top
sucks the water right up!
might have to turn the towels over after a while if its really...
If you are going to service the gearbox, do it yourself.
I did it following wynode's guide, it took me a weekend.
It was easy enough and wouldn't have been more than $150 including new fluids and...
my mates dc2r has this same problem. we just replaced the clutch in it and the problem started. VTEC works fine just no speedo/odometer
have checked the fuses under the...
