Search:

got a new one brand new from states, honda usa still has em in stock 250$ delivered

i found out the problem guys, the sock on the fuel pump was upside down, wasnt getting enough fuel pressure after car warmed up..

Well, first of all you need to jump the ecu connector in the passenger side in the kick panel with a bent paper clip, it should be a 2 pin blue? plug, then crank the key to find out how many times...

I have a 1995 OBD1 Integra VTIR B18C2 engine and been having real bad troubles, the car is on about 255,000kms/ 158,000 miles,
I got the car for cheap and decided to use it as a daily to drive to...

the box is a y21 i think :]

ozhonda isnt dead, there are just more people advertising on social network n stuff, the scene is still alive

as in just for the gbox itself, how much are they normally worth?

how much does a b16a2 y21 gearbox go for these days? Looking to buy one thats got 180,xxx kms on it, does 350$ sound reasonable?

Ran in to bit of a trouble again with my progress with my conversion, im using a p73 ecu with a rywire conversion harness on eg5 civic, and wired up o2 sensor,knock sensor and vtec solenoid to the...

all good no worries, got the both the pinouts for the ecus, i ll sus em out and wire em up thanks man

so even though i have a conversion harness on the ecu end i still need to wire up extra wires going to the ecu for o2 sensor heater and knock sensor n such

http://www.d-series.org/forums/attachments/diy-forum/27389d1301859377-obd2-harness-obd1-distributor-conversion-harness-obd-wire-color-differences.jpg


does this look right?

the engine came with obd2a dc2r harness on it, up to the shock towers its obd1 original si, and at the ecu end im running conversion harness obd1 to obd2a ecu

Hey guys just finished a b18c7 conversion on my eg, and i ran in to a dead stop thanks to the distributor wiring conversion, i ordered the conversion harness but got lost in transition, and usa to...

yeah it was pretty messed up i was more concerned about the shape of the car it was in than my self.. cause the car was a private import and you just cant find a decent sir eg6 anymore.. :(

i had an eg6 sir 20th aniversary black with bronze tinted windows.. one day going to girlfriends house got sandwitched on m1 freeway.. car was a total wreck holden commodore ran up my ass going 100+...

hey guys thanks for all the awesome feedback, my goals are i want to run my car on like a low 6 psi using a gt28 bb turbo.. i want to use 330 injectors from prelude vti-r, thinking about using...

Hello ozhonda, i currently want to boost my civic dohc d16a8 engine, but i been having trouble finding the manifold for it.. i have looked on ebay but most ebay kits are flimsy and they are suited...

Hey guys im in the market for some coilovers for my eg5, im running stock si shocks with king springs ultra lows.. i was happy at start with performance but now it handles like shit and my biggest...

if the b16a2 came stock on your vehicle should be on the placard under the bonnet yo ;D!

Hey guys, i recently mangled my lhf half shaft on my d16a8 engine. I went to hondwreck and the guy there said a half shaft off a eg2 delsol would 100% work.. i came back home installed the drive...

yeah also kills performance of your engine, and leaves you with a shitty gunked up intake and gummy throttle body.. :]

hey guys, thank you all for your input... i found out what the problem was a while ago. the people who put the windscreen in didnt seal it properly at the top left corner... i used clear silicone to...

i have 4/2/1 headers and 2 1/4 inch piping single resinator with my spoon n1 tip.. sounds fkn sick but the thing is.. its fkn loud if you like to go over 4k rpm.. and also i have the silencer, with...

thanks for the replies guys, i think the back pressure like pat88c said is really not a myth.. because when i put the silencer on the spoon n1 i get better response at lower rpms to mid... but at top...