Search:

No it wouldn't be easy since stock wheels have 55+ offset and u have at least 2 inches sticking out for both front and rear wheels so need roll guards especially the back, camber arms as well as...

You'll probably need them for the front.

Hope this helps

Thanks guys for the descriptive advice,

I will be opting for the spring shock combo since i would not be getting my car on the track, and since my setup for the car is for a daily so therefore i...

When u mean old, how many km's did the shocks do??

cheers

Hello guys,

I'm currently questioning if i should get the eibach pro-kit since they are pretty trustworthy but , just want to ask does it actually kill the shock absorbers? and if it does how long...

Well for a fact i know 18X9 et+ 35 fits on the cu2 but it also depends on the wheel design, but based on the specs it should be fine with brake clearance.

Hope this helps!

Yepppp im using this configuration atm as long as you change all four tyres or it will change your fuel economy due to the slightest difference in wheel height.

Im currently using bridgestone...

You can try bridges tones potenza re002 235/40 r18s or the S001 235/45 r18 both are pretty good or an alternative is the nitto in so.... Apparently they r pretty quiet and grippy

Hahahah same here when thinking of what wheels to put on the cu2 lol..

umm First of all anything above 35 offset would would be no probs for the rear, will fit tight and sit quite flush with...

Depends on what kind of look you want, like for example concave or not,

Also some people run with spacers is because of the design of the wheel where the spokes dont clear the calipers, but with...

That would require a bit more work since the cl9 doesnt have the big arches as the cu2 does but it should be fine the car is not lowered too much, if you want to go lower might need guard rolling and...

That should be fine as the width is only half inches wider and also the offset is not too aggressive so minimal work can be done to fit them. Done even need guard rolling!!

cheers

That should be fine as the width is only half inches wider and also the offset is not too aggressive so minimal work can be done to fit them. Done even need guard rolling!!

cheers

Or the other answer is that honda uses planetary gears rather than coventional gears so to give small engines a better torque ratio, and that sound might be planetary gear changing, this also happens...

Yeh they do for example look at ed_423 s euro he has 19x9.5 forgestar cf10 rims and it fits perfectly or look at euro noobs euro also with 19 inch rays te37 with et22+ soo yeh

It's best if you have 225 or 235 with either 35 or 40 if its like 45 might need roll guarding and shit...

The high beams are actually hb3s not h1s

How much poke is that on the front?
Cheers

Evo 9!!!

What if they are advan rs rims, like some rim that has a 10 spoke wheels design........??

Just wanna know would am offset 35+ clear the caliper on a cu2??

Well assuming I'm gonna lower it and put natural camber do I need to roll my guards u think cheers

Hey nice!! Are those works emotion xd9s by any chance?? Pm for how much they set u back pls..

Hey there,

need your expertise again, um how much does 30mm poke look like on a car??... as in can you guys show me how it looks cos im going to get these wheels on the cu2 that will poke out 30mm...

How much camber did you have to put on or even any??