Search:

More info
I think that dc4, dc2 vtir and egs got the same front and rear shocks and rear lca

I could be wrong :)

If you have patient to wait. Go ebay. If not i got mine from supercheap before. At best bring the sensor with you if you are going to supercheap some hose adapter got different fitting with the...

update i got del sol break setup already..just wanted the 4x114.3 stud pattern
choosing prelude cause its cheaper other than 96-98 spec integra type R break set up

i havent seen people doing this conversion..but to they go straight fit like the tegs break setup goes into eg with no drama..

prelude got the 4x114.3 stud patter
civic (92-95) 4x100 stud patter...

i agree with you

when i removing mine i use 1"dr breaker bar fitted to a 32m socket and inserted a 1.5 meter steel/metal pipe on the breaker bar.

tried using 1/2 dr breaker bar and fail

hope...

same issue with my ksport on my eg..try removing the fork fron the coilovers. if still not coming off remove it from the lower ARM :) mind me asking doest it have mounts for breaklines..?

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc7/318157_2132256118492_1608703888_2022596_148537_n.jpg

cooling was awsome..but it takes time to warm it up.. haha..oh wells just what i need..
...

what spec do the type R have..?

are they single or dual..?



sorry man..feel free to reply thanks

do dc2/r got the same radiator as other hondas..?

like EG and EK
you can swap their radiator with no modification :)

if yes can you list them thanks in advance

we identified the problem..? lol..you were just talkin about the leak (the cam seal for the exhaust cam) the WHOLE TIME :)

getting another distributor


btw guys im still gonna thank you..peace!

you guys are funny. the main problem here is my distributor? Ive done my research and find out the problem..haven't move on to that leak yet..?

btw heres some picture
...

cams exhaust seal on the left side of my rocker cover..faaaar away from my main problem i found out that my dizzy doesnt give any more spark did using screw driver..tried using different dizzy and...

well i do..i just wanna get some ideas if its a dizzy or pistons rings problem.. got the answer now tried using different dizzy and there goes the spark ;) time to find a dizzy



and yeah just...

not really sure if its a dizzy problem..i did try to crank it putting screw driver into the spark plug coils but its not giving me any spark..not i got a friend mechanic coming tomorrow..i just wanna...

nah my oil are good..recently i just made a service oil are just abit darker..not milky so water and oil are not mixing..
just about to do a compression test tomorrow..

thanks for helping!

car giving a huge smoke coming from exhaust(its petrol i can tell by smelling it) and its white

Im not sure if its a distributor or piston not burning fuel problem..

question is can this be a...

its really hard coz of the hot oil makes it like plastic..anyway what i did to mine was cut it off from the bottom and change the hose. top one is easy..bottom one is a pain!!

front shocks yes..no at rear..but i think they have the same springs

http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs786.ash1/167640_10150128996350011_628000010_8376000_2048544_n.jpg

just look at that set up.. normaly i think they only have 1 hose from Intake and...

http://www.youtube.com/watch?v=teGrvDePKUM

or search for easiest way to stretch tires..

bit dangerous just by watching lol.

anyways good luck

thats prolly p28 ECU from SOHC got the same ECU and same engine..have you tried ECU RESET..if it doesnt help..mybe your ECU needs tuning..

picture of a dc2r intake manifold can provide picture..

as the title..because im upgrading my b16a2 for p73 i dont know where to connect this sensor with hose..this is a picture of my p30...

just a picture if your intake manifold if you have p73..will really appreciate it..i just dont know where to connect the sensor from the 1st photo..

as the title..because im upgrading my b16a2 for p73 i dont know where to connect this sensor with hose..this is a picture of my p30 intake manifold
...

between iacv and im..?