Search:

Well What Has Been Happening Since The Last Post.
First I Have Adjusted The Head Lights.
They Now Point To A Sun What Better Place On The Road. (Before The Were Like Eight Feet In Front Of The Car)...

Me Bad Sorry For Spelling error All Fixed

yes that is what the Honda Manual Says To Do As You Can Read In This Image

http://i143.photobucket.com/albums/r141/auzzie_biker/Honda%20Civic/GearboxReplacement.jpg

Well Here Is The Latest

It Took Me A Day And A Half To Remove The Old Gearbox. I Took It Slow And Steady And When It Hit The Ground I Was Happy It was Out.
The Most Surprising Thing Was How Easy...

I have a faulty gearbox I got the replacement (same model as the faulty one) and the manual was saying that to remove the Gearbox Only motor is staying in the car that you have to remove the...

Honda 3 Door Hatch Auto Gearbox Replacement

Well People A Little Help Is Needed I have read all the information I can find on replacing the Automatic Gearbox on my car (1990 Honda Civic 3 door...

New gearbox arrived at 8:30am today I will be fitting it next week and then I will be mobile Finnaly

New gearbox arrived at 8:30am today I will be fitting it next week and then I will be mobile Finnaly

New gearbox arrived at 8:30am today I will be fitting it next week and then I will be mobile Finnaly

The Car A 1990 3 door Honda Civic Automatic D15B4 Motor Not Sure what model the gear box is bit is the original One

Problem had a damaged main drive shaft oil seal I replaced that and added the...

I managed to get the loan of a 32 mm socket 3/4 inch drive and a ratchet to suit and I will remove the drive shaft nut and the then the lower ball joint and then pop out the axle and remove the oil...

Is It Possible To Replace The Drive Shaft Oil Seal Without Removing Main Axle Nut?

First The Car Is A 1990 Honda Civic 3 Door Hatch With D15B4 Carby Motor and Auto 4 speed Box.

The driver side...

Car Is On The Road Passed The Safety Certificate and Rego Paid I Am Mobile Again

The Latest

Breaks Are All done.

I was going to do a series of photos but the weather here has been bad loads of rain and I just needed it done.

A Couple Of Comments On Shoe Replace
1....

There doesn't seam to be any problems with the wiring no mets that I can see could be it was just taken out when wasn't being used (But only time will tell).

Update Changed the front break pads...

hey mate you still got the old steering wheel because I am after the H from the middle mine is missing any chance you want to part with it ????

Try This E-bay Shop for The Amber Corners
http://www.ebay.com.au/sch/rrr092009/m.html?item=260857422902&sspagename=STRK%3AMEWAX%3AIT&rt=nc&_trksid=p3984.m1423.l2649&_trksid=p4340.l2562
they are...

Well More Progress On My Honda

I Received The 2 new front indicators and the side light (But sadly the side light was wrong I phoned the company and they happily sent me the right one and at no...

hey Guys and Gals I found this On Eric The Car Guy

http://www.youtube.com/watch?v=L7_RsnD8hAU&feature=player_embedded

it is very informative and shows you how to change the auto oil

enjoy

Here is the solution to the problem and only a few Dollars will take about 3 weeks to arrive from the might Hong Kong
...

Very Nice Mate Will Keep This In Mind For My Workshop In The Future (also I will need a compressor)

this maybe so for you city folk but us country folk that is very hard to do doubly so when this is my only transport and it isn't registered yet and also what do I do for wheels while they are being...

Ok Here Are The Photos

http://i143.photobucket.com/albums/r141/auzzie_biker/Honda%20Civic/BumperBeforeAfter.jpg
This Is The Before And After Of The Bumper Work
It Took To 3 Hours With A Block...

Here is an update

I have spent 4 hours with a hammer straitening the front bumper and the metal part inside it and it isn't perfect but it is a lot better.

The new front indicators have...

why do you need the oil filter tool if you do your own oil changes and only hand tighten the filter which is recommended and don't forget to put oil on the rubber seal