Does anyone have experience with fitting Recaro SPG bucket seats in the EP3 using stock rails? is it just a straight fit with the Recaro side brackets?
Bilsteins are available for the EP3, B14 series Part No. #47-118768 - this is a complete coilover (uses stock top hats), you can get them from Balance Motorsport in the UK, was around $1350 when I...
RCAs could potentially correct the RC location issue, but it wouldn't correct the bumpsteer problem, you actually need a coilover with the steering arm mounted lower on the damper body. Even with the...
Ahh right, I can't think of a situation where you would want the rear to have more static camber than the front, because the double wishbone setup on the rear gives more dynamic camber gain during...
Depends what you want to do really, OEM coilovers are more than adequate for street use, after market really isn't going to generate anymore grip...unless you drive like a maniac on the street. If...
Just for clarifications sake (even though it is obvious), the area with the lower temp would be the one not getting enough contact and the area with the higher temp means it's getting too much...
Does anyone know if it's possible to set the Toe to 0 with a maximum of -3 deg camber (for Front suspension)? This is at stock ride height (345mm from hub centre to guard).
