Search:

For any one looking up this info in the future.

Looking into plug from top of dash guages at you.
1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9,10,11,12,13,14,15,...

Hello,
Im working on a project where Iv got an adapter that takes OBD1 datalogging protocol and converts it to CAN.
Iv got it working on the Bench with GM dash since all there protocol and pin outs...

No idea, Not in AU so havnt dealt with any AUD models of them before.
But get the full code off the sticker on the side.
Then look in the PGMFI bin page in the Wiki and find the one that matches...

Haven't tried it myself, But it should work since that's the only difference along with the JDM ecu not controlling the purge control valve.

http://www.hondata.com/s300socketing.html

Manual ones can be chipped, Auto ones cant be.
Ones after 95 cant be chipped either.

I do chip them but Im only providing this server within New Zealand.
Yup a TTL converter works fine, Just be aware that the cheap ones arnt quick enough for tuning but they do give the information...

Hondata forum and site has lots of basemaps.
Just make sure its a legit S300 since some of the copy's have problems with uploading maps to them.

If your VTIR is OBD1 it should plug straight in.
Which ECU does the b18a1 use? You may need to add the needed parts to convert it to Vtec. Or you could just re-chip the VTIR ecu (if its obd1) and...

Chipping RB20 or most RB and SR ecus is the same as doing Honda OBD0 if its a Nissan OBD0 one. You just remove the stock 28pin eprom and solder in a socket. If its a OBD1 then youll need to get a...

Hondata stuff is best installed by a official dealer.
Justin at RevZone is Australia's Hondata dealer.

I only deal with Honda OBD0,OBD1 and OBD2(remaps in rare cases). Nissan OBD0 and OBD1....

How To Chip Honda Ecu's
I couldn't find anything on this with a quick search so I have decided to share a post I made over at NZH a while ago about how to chip ecu's.


Tools:
Soldering iron...

Yeah the turbo on the city is being way over rev'ed. There efficiency drops off at 18psi but the big front mount manages to keep the air cooler enough to keep making more power.
And for the fact...

Hey there.
Im from New Zealand and have been a long time member of NZHondas and Honda-Tech.
Just recently found out about this site so thought I might as well join and follow whats happening across...