Search:

Ek4 loom
Ek4 Ecu
Ek4 rear engine mount

Everything else should bolt up

High chance it will be the dizzy ( Change coil) if it dies out while driving.

B series weakest link is the dizzy

98 spec 5 stud use 36

AUDM 5 stud use 32

1) Im aware that b18c7 or b18c would fit straight into a EK1 with along side me getting EK4 wiring harness, b18c/c7 ECU, B series shafts and B series linkage. Is this correct? YES

2) Will my AC...

Yes......

Save for a b series, not worth the money

Toys Garage in yennora

Im not sure why people are telling the guy to use a integra loom when you can use the current del sol b16a loom

Doesnt matter if the del sol b16a engine is obd1 or obd2, you just need a obd1 ecu...

You need to change your shift linkage, del sol shift linkage wotn fit in your eg

yes, you can use the Audm p73 ecu for your jdm motor

I want to run 6-7 PSI on my B18CR

What size pulley do i need to get if im running stock Crank pulley?

The pulley that is currently on my S\C is very small....

You can re use the d15 ecu

Yes......

Re use as many d15 parts as you can

Make sure you use d15b Intake manifold on the Y4

d16y4 Mani doesnt have IACV

Yes they are the same

Make sure its obd2a injectors

Problem is the ecu, if hondata s200 is blinking means you have problem
It should be solid.

Lol.... all good brother...

Learn something everyday

Perfect picture you have posted up obd2b

Plug A should be located in cabin harness?

100% your ek gli 99 will not have this plug mate

You tell the guy to use obd2b, so is plug a in your...

You can't use obd2b in a EK, it will not work

Just have to wait until he.post up a pic

Take a photo of ur ek 99 gli ecu plugs and post it up.

Let's refer back to op

Hellomotog : post up a pic of your ecu plugs from your 99 car

You should have 2 greg plug and 1 green plug

Ek gli and cxi 96-99 all have the same cabin wiring loom

Ek4 obd2a
Em1 obd2b

Faithless : what model is your ek?
How can you be sure that ek gli 99 is different 96 ek?
Have you experience...

YOu can run p73

factory c7 ecu

YEs B18c7 and Ek4 wiring loom is obd2a

B18c7 wiring loom stops at shock tower

Ek4 goes straight to the ecu

YOu need EK4 wiring loom to run the B18c7 in your EK