Search:

Oh and got a set of OBD0 340cc on hand too.

Daily and occasionally some Wednesday night drags and Wakefield run. Da9 hasn't been to either yet.

Forgot adjustable fuel regulator. Well I had a p72 head with standard valves. And 4 weeks ago upgraded to a pr3 with type-r valves. 4.4 early modle type-r gbox.

Ok. B20b. Type-r crank. Pr3 p/p head. Port matched skunk2 mani. Plm big tube header. 13 comp pistons. 2 leaf head gasket. Type-r cut back valves. 70mm throttlebody. 350 walbro pump. 240cc injs. 100...

Could you suggest some with similar lift and duration?

has any body got experience with buddyclub absolute racing cams,(I think specVI) on a b20V?

all sorted. just had to calculate the injector difference which was 40% give or take. And dropped the fuel pressure from 55psi to 32psi. kept the same fuel map settings too. 13.5 A/F across the...

just swapped my p72 head for a P&P PR3 head, on my B20 block and went from a set of B series 240cc injectors to H series 345cc injectors.

I had the 240's set at 55psi in addition with a air flow...

i've run Buddyclub's spec3+'s for 6 years now. haven't had a cam lobe snap of yet!

OK I'm trying to help a mate out in identifying a set of BC3+ cams he bought from Ebay. they claim to be BC3+. I had BC3+ put in 'bout 6 years back that I bought from JDM yard and were installed by...

http://https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash4/735210_10151373978811591_1483073698_n.jpg...

I ended up using an EVO 4 seat which was originally in my DC2. but considering I swapped those out for OEM ones so my missus can drive the DC2. they're now going into my DA9. I bolted the left rail...

last night i left work. and gave it a boot full, i snap 2nd and the back rest of my seat snaps completely off throwing my head into the rear passenger seat. so what my question is will 88'CRX seats...

just took time to read earlier posts. sounds like it went well!

your situation is ****ed. been there done that. don't go the lawyer route. waste of cash. they'll bring up all your driving offences and judge your character on that. which don't look like you got a...

if so 225/50r15 sounds the way to go if there's not much flex?

I'm about to buy a set of blue buddyclub 15"x8"s. What would be the widest tyre I could fit on these without to much wall flex ? I was thinking, maybe a 235, 50 or 55 R15.

cant no servo near me carries the stuff (@ RYDE) . unless i go to sydney CBD.

got my meth/water injection kit on the way from atlanta/georgia, U.S.A .$289.42 AUD$ including postage. there were some locally, but i saved my self $100 buying from E-BAY. just shopping around for a...

thank's for the input. I've decided to get a mist kit with a 20 litre tank and a front mount oil cooler. now its just a matter of time to purchase and install 'em. again thank's!

Now in the long term buying methanol. Will be more expensive. As its daily driven.

http://www.youtube.com/watch?feature=player_detailpage&v=RDrw42_KuZY

this is for a daily driven motor. was only considering it for the summer. the cooler would be plumbed down into the front apron/bumper under the drivers head light, in a DA9 chassis. and the constant...

As the title says, what are people's thoughts. Also consider the motor is running a 13.0:1 compression ratio.

Your ignition timing could be to far retarded.