Search:

hey guys i recently installed a 96 spec itr steering wheel in my eg, i was just wondering how to wire the horn up, if theres a diagram or a certain way of doing so it would help me alot...

hhmm i hope its not the diff taking it tot he mechanic tomoroow lets see what they say

im running stock rims soon as the car starts to be in motion the noise startes and also feels like the cars kiking out each time i take a sharp corner

hi guys today my car started making a wierd ass noise from the rear it sounds like a grinding/ dieying duck its definetly coming from the rear passenger side and also if i might add car feels kind of...

nathing wrong with disc or pads i got a feeling some were needs to be greased up sounds realy realy ruff maybe new bearing? any 1 have this issue before?

Hi guys im getting a squeeking noise from my passenger side rear tyre i pulled the tyre of seems fine pulled the brakes apart nathing wrong there any ideas??? as i brake the noise gets deeper and...

yep sure am lucky....

thanks for all the help guys but problem solved, the old distributor was f*#&*, and when the new distributor was put on the bit that joins in to the camshaft snapped clean off, and luckely the metal...

battery was charged, before anything went wrong. plugs have been changed to iridiums, running spoon leads and the dizzy is made in usa.

no the dizzy came complete.

hey guys just having some issues with my b18cr eg, started it 2 datys ago in the morning, all fine then it stalled out of nowhere (whilst still warming up), then as i cranked it ova again it would...

thanks for all the help guys still scratching my head on the rims

lol guys im after rims not dinner plates id go to homemart for them

Hi guys I’ve been dwelling on this for a while now I can’t make up my mind what type of rims to put on my yellow s2k any ideas ??? something that looks nice I was leaning towards a white colour rim...

See the thing is 60 mm is sought of inbetween 2.25 and 2.5mm, i didnt have the mulla to get a 60mm so i went as close as possible without oversizing it, im wasnt looking to get a tune so i went with...

2.5 inch and i would loose too much down low...i wanted response and low down power delivery and i achieved it...plus 2.5inch would get so much louder.

hey mate iv posted a similar thread but it was for my b18c7, upgrading to a 68mm portmatched intake manifold and TB, everyone said no gain/lose gain, but i did not get that result, standard ITR runs...

facelift FTW!

Yes it will...

asr bar can be purchased from jdm yard, and a dc2r swaybar or uprage will fit onto that. but a stock dc2r sway bar is 22mm if im not mistaken is more than enough for a eg. im runnin F7 controller...

yeap all cheked there all good tryed removing then all one by one and pluging them back in still same problem could it be the regulator or ecu?

NEED HELP BADLY GUYS I COULDNT MAKE I TO MY MECHnic today so i did the ecu est by my self and now the car will not start i get red but usally when ever i flik it over to reds i also get my engine...

thanks for all ur help guys i havent had anytime what so ever but monday morning its going to the workshop to get pluged up into the comp and hopefuly it will tell me whats wrong with it, any idea...

guys today while i was driving i seems to have a problem whenever i hit vtec it was like the car was struggling between 6000 & 7000 but after that seems fine will definetley let you guys know when i...

hi guys i just serviced my car i used 5w40 engine oil and a ryco oil filter after 1hr of driving my engine light turned on i switch the car off it goes away then 30mins later its back on any ideas...