Search:

OK. Here's some photos I took.

Here's the old mirror mechanism. Note the large spring that is used to allow manually folding in of the mirrors. Compare this with the JDM motor in an earlier post....

Persistence has paid off.

Fold-in mirrors are GO!

I can confirm that the diagrams above are correct and work.

I made one alteration and that is I didn't run the EARTH wire all the way over...

Here's my schematic for the Integra DA9:

http://i46.tinypic.com/35i97vb.jpg

Note: I don't take any responsibility for any damage you may do to your vehicle as a result of these instructions....

Mirror Relay (Blue plug)

Not to scale. Looking at the plug from the wire side.

http://i45.tinypic.com/nppa0x.jpg

Peter

Here's a drawing I've done for the pins for the mirrors.

Please note that each pinout is looking at the plug from the wiring side. That is, looking at the plug from the back. Also, my labeling...

I did some continuity testing on the Aus-spec plug at the under-dash fuse box and I found out that all the wires have "active" functionality so it's really only the one wire - the one that makes the...

Doing the Job

Firstly, a word of warning!

This is a simple two hour job. CRAP!

This is not a simple conversion. I have been working on this for quite some time now, and in fact, I only...

OK. I know this is an old thread but I'm in the process of installing a pair of JDM Integra fold-in mirrors on my DA9 so I thought I'd revive it rather than making a new thread or "How-To".

I was...