Search:

apologies for the delayed response, checked with jesse and the cost of the antenna straight from japan is expensive $280.93 (26,145yen) each. I was amazed it was so expensive there.

Ever thought...

Hey Alvis...I have exactly the same issue....was quoted last year about $110 for a second one installed. Can you give me the part number and and we can check to see how much it is to source straight...

interesting readings i get with 22mm / 22mm

Lateral Acceleration: G
Static weight distribution: %
Vehicle mass: lbs
CoG Height: in
Front Rear
Track Width: in
Roll Center Height: in...

Not sure if you al have seen this website but very interesting website to do some calculations.... with an explanation of this: http://www.blackartdynamics.com/Chassis/LoadTransferDC2.php

All...

in a EK GLI scenario would you get more of an improvement in handling and cornering running a 22mm/13mm setup than a 22mm/22mm setup? Obviously a 26mm / 22cm would be optimal with subbrace?

Hey bennjamin hows it going?

In your experience and given eekayfo's post, (excuse my ignorance) what would the effect be with 22mm on both front and rear sway bar. Would it increase the oversteer...

Thanks for the info eekayfo. My EK currently has the King spring lows on it and the rest is stock. It will be just a daily drive wont be tracked.
I am just looking to do a simple rsb upgrade, so...

Hey guys

Been doing some research into this topic of installing an RSB onto a stock EK1 sedan and sounds like Honda has the same setup as Alvis on here (thanks for all the part numbers Alvis)...

Thanks for your wisdom J :). I am great, hope your well, I'm off to China tonight for three weeks. Will book in to see you when I get back. :) Be well :)

Hey stndrd, on the EK that has done over 280K, its currently using Penrite PRO 20 (20W-50) Mineral, which was selected as the engine has done that many Klms. Is this an oil you recommend for higher...

Bump. Anyone had any experience with the Yonaka Motorsport Exhaust System on a EK or any other honda?

I've viewed quite a few videos on youtube and this cat back system sounds pretty good, nice...

Thanks for the offer Honda_FD.. Damian from Suspension City is very knowledgeable and super friendly. He was the one that put in my original Kings. I spoke to him about a week ago and interestingly...

I was looking at the BC BR's but came across AMR engineering coilovers. Seem to have a very good reputation in the US and some OH members run them and say they are great. (thanks to their input as...

Thanks again guys for the advice :)

Thanks for the advice guys.

I don't plan to track it at all, just a daily ride. I've noticed on Honda-tech it is all recommended to go the GC coilover sleeves with the Koni's. Is there anyone...

Hey all, On my ek4 sedan, I've been running king spring lows and stock shocks for about 6 years +. I'm biting the bullet and looking at either coliovers or just installing Koni yellows to mate with...

Thanks again Bennjamin

Trism, I did some tests today on the road and Trism called it correct. It seems to be the same noise source and makes the "ratatat" as the revs go up taking off and slowing...

Thanks again bennjamin for your advice. I'll look into it. What would you suggest a guesstimate price for that sort or work?

Thanks bennjamin for your reply, based on that view point, would you have the trannie also sent off (by the mechanic) to get stripped and looked at or would you just replace the bearings or get a...

Hi guys sorry been stuck at work until late will get to trying this soon, any other thoughts :). Thanks heaps

Thanks for the reply Trism.

Apologies I will try and explain it further for you.

The first noise being like a diesel type idle is definitely there on idle and goes silent when the clutch is...

Hey guys,

My 96 D16Y4 non-vtec manual is making strange noises at idle and also when coming to complete stop.

At Idle and the manual transmission in neutral and the clutch out the car is making...

Thanks Zdster, will check it out over the weekend and report back with a progress report. Thanks for the quick response. :)

Hey all,

Just wanted to pass something past everyone on here, I have a metal tapping noise comes from the door latch assembly when i go over bumps and just seeying if anyone has encountered it and...

Hey guys, try on ebay, they normally have Civic Type R replica grills...Here is an example and no it aint me..selling it lol..:). I was looking into them for my EK.
...