Search:

eastern wheel works in lilydale re-roll alloy wheels, check out their website.

it should fit with some camber just dont lower it too much, or 205 tyre should help.
im running 16x9+20 on 205/45R16 guards pumped but it slammed.

what you worried about just fitting or speedo out of wack?
should work since its for track not going to tyre tuck or anything.
try out willtheyfit.com

Yellow Speeds i got around my budget, to my door for $950

did you know why it needed the refab, was it because the bends were totally different?

yeh trying to find out what i need to shorten and customizing.

Thanks eeko, did it set you back much for the refab?

Just want to know what is needed to be modified to fit a Hatchback?
Just shorten the B-pipe or is the axle back needed to be modified also?

testfitted today.

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/556415_3502536926521_728421476_n.jpg

http://i675.photobucket.com/albums/vv111/jdmEK4/600021_3501520701116_1058791243_n.jpg

Yeah, ill get a photo up sometime soon, with the fuel hose they are not really sturdy and will collapse over time and you’d be using a lot of washers to get a noticeable lift in the spoiler. I went...

Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own...

First Free Inspection. Also ask to get the oil+filter changed or do it yourself i would recommend this, as you are running in the motor pretty much. Don't think it will warrant the warranty.
At...

looking at some steelies, with that spec wondering if anyone has tried these specs on an EK all round.
going to have camber kits and coilovers.
165/55R15's or 165/50R15s

yup with camber kits

Hey just wondering what rim specs i should get for a nice fitment with 15x8
can i go +10 front and +0 rears?

mines abit hard to start when the fuel is under a quarter but anything above starts fine.

I just tried out your DIY and i got 61 but it was my ABS light flashing and Engine light just stayed on.
primary Oxygen sensor
i have problems starting my car up in the morning or leave the car...

Hey just wondering which my one is? B16A2 from a 1996 EK4

enough for the brake lines and the master cylinder. 1 bottle?
take out the old fluid from cylinder pour in new fluids and bleed the lines starting from the one furthest (left rear and so on.) keep...

if it makes it easier i used one of these to get the hole perfect http://windsweptsoftware.com/myhouse/2007/Holesaw1.jpg
then a paper blade heated up with a lighter to cut out the little locking...

do or dont?

Falken have normal tires 185/60/15

isn't it just a bonnet, fender and front bar swap over?

I've recently changed the oil, i think its the bearings thats making bad noise

i've asked about this 6months ago, haven't fixed the problem still runs fine after 6months maybe a bit noisier.